|
 The Sludge Level Detector is as a portable instrument for the measurement of the solids content and top level settling properties of waste water in basins and tanks.
The Sludge Level Detector is lowered into the liquid to be tested and depending on the solids content the bar-graph responds. Upon reaching the sludge sediment the LED display changes from green to red to indicate this point.
An acoustic message supports this process and the audible tone changes from an intermittent to a continuous tone when the sludge sediment zone is reached.
The depth of each layer (clear water, sediment layer) can be read directly from the cable in steps of 0,5 m. The measuring head consists of an impact-resistant plastic housing and is provided with a special LED light source. The lightbeam strikes the photodiode on the opposite side.
The Sludge Level Detector quickly supplies information about the depth of the sludge-layer in a sedimentation basin.
|
The Advantages
- Measurement via LED-display
- Acoustic message support
- Solid measuring head
- Rechargeable battery operation
- 1-key operation
|
|
Display:
|
LED-row, multi-colour bar-graph
|
|
Acoustic signal:
|
intermittent or continuous tone
|
|
Battery:
|
7,2 V rechargeable battery, charge indication
|
|
Operation:
|
1-key operation, the instrument switches off after disconnection of the measuring head connector
|
|
Ambient temperature:
|
0 - 50 °C
|
|
Enclosure:
|
ABS plastic housing, splashproof
|
|
Dimensions:
|
188 d x 135 w x 78 h (mm)
|
|
Weight:
|
0,6 kg, (without measuring head, cable and carrying case)
|
|
EC conformity:
|
CE identification marking
|
|
Contents:
Instrument including carrying case, measuring head, cable (10 m), battery-charger, instruction manual and guarantee sheet
Cat.-No. 419806
|
|
Cat.-No.
|
Item
|
|
419806
|
Sludge Blanket Detector AL 23
LED-Bar graph display, acoustic feedback with measuring probe and 10 m cable, battery operated, with carrying case
|
|
419811
|
Spare Probe for AL 23
complete with 10 m cable, marked at 0,5 m lenghts
|
|
