Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)

MS Series Conductivity Cells from Aquametrix

USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 -

MS Series Conductivity Sensors are Now Included in the AS Series

Please note that the MS series is now part of the AS series. The epoxy bodies of these probes have been upgraded to the Noryl outer shell and epoxy interior of the AS probes. Graphite electrodes are specified as "AS-G-xxx.

A conductivity system is only as good as the sensor or cell which provides the signal to the analyzer or controller. AquaMetrix Inc., with many years of experience in the measurement of conductivity, manufactures a wide variety of conductivity cells to satisfy any industrial, power plant or laboratory application. In addition to the standard line, all types are available for high temperature applications. MS cells feature electrodes made from specially impregnated graphite. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Ten cell constants from 0.01 to 50 are available. All types are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all types and provides compensation to 25°C when used with a compatible analyzer. Carefully selected thermistors are located in such a way as to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning.

Submersion mounting is achieved by reversing the direction of the compression fitting, allowing the cell to be threaded into the MHMSC mounting hardware. Mounting hardware is available which includes a 4 foot length of CPVC pipe and a simple but versatile adjustable bracket for hanging on the rim of the tank.

Ball Valve (“Hot-Tap”) types permit removal of the cell from process piping or from tanks without shutting down the system. They are available with either CPVC or stainless steel valves.

In addition to the cells described here, special applications such as food grade cells for the beverage industry are available. Ask for assistance in selecting the cell and instrument to suit your particular application.


  • Graphite Electrodes

  • Economically Priced

  • Automatic Temperature Compensation

  • Adjustable Insertion Length

  • Ball Valve “Hot Tap” Types Constants from 0.01 to 50

  • High Temperature Versions


  • Boilers

  • Cooling towers

  • High purity water applications

  • Pharmaceutical Applications

  • Reverse osmosis systems

  • Food and Beverage

Data Sheet
Submersion Mounting Hardware
Hot/Wet Tap Ball Valve Assembly
Sanitary Mounting Hardware



About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.


Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch