Chem-Pro® C2 Diaphragm Pump
-
Max feed rate: 15 GPH / 55 LPH
-
Max pressure: 175 PSI / 12 bar
-
166 RPM (Max strokes per minute)
-
Variable speed, Smooth motor driven chemical feed
-
Nema 4X washdown / IP 66
-
Back Lit LCD display
-
Priming / Degassing Valve Built-in
-
Leak Detection Built-in Diaphragm Failure Detection (DFD)
-
Exclusive Diaflex® Single Layer PVDF diaphragm.



Benefits of a Diaphragm Pump:
-
Capable of high pressures and high volume outputs.
-
Non-loss motion variable speed DC motor is powerful, quiet and energy efficient
Capabilities:
Communication & Interface:
-
SCADA ready 5-30V DC open collector output loop closes while motor is energized.
-
Profibus DPV1, Profinet RT I/O, Industrial Ethernet/IP, Modbus RTU and Modbus TCP available
-
Signal inputs include: 4-20mA, pulse inputs, and Remote start/stop
-
Signal outputs include: Relay (3 amp), open collector, 4-20mA (optional)
-
Upgradeable firmware
-
Large, intuitive control-pad
-
Backlit LCD displays motor speed, input signal values, service and alarm status.
-
Includes Diaphragm Failure Detection (DFD) system.
-
Compatible with Blue-Whites Flow Verification Sensor (FVS) system
-
Alarm relay monitors the DFD system and the FVS system.
Superior Engineered Design:
-
Protective LCD snap-on cover, (UV, in field wear and tear)
-
Large single piece junction box with terminal block connectors inside
-
Large PVDF, Ceramic, TFE/P double ball check valves without metal springs.
-
Priming and degassing valve built into the pump head.
-
Exclusive Diaflex Single Layer PVDF diaphragm.
-
NEMA 4X (IP66) wash-down, chemically resistant powder coated enclosure.
Patents Pending:
Max. working pressure: 175 psig (12 bar)
Max. fluid temperature: 130ºF (54ºC)
Max. ambient temperature: 14 to 110ºF (-10 to 46ºC )
Maximum viscosity: 1,000 Centipoise
Maximum suction lift: 15 ft. Water, 0 psig (4.5 m, 0 bar)
Operating Voltage:
115VAC/60Hz, 1ph (1.5 Amp Maximum)
230VAC/60Hz, 1ph (0.7 Amp Maximum)
220VAC/50Hz, 1ph (1.0 Amp Maximum)
240VAC/50Hz, 1ph (1.0 Amp Maximum)
Power Cord Options:
115V60Hz = NEMA 5/15 (USA)
230V60Hz = NEMA 6/15 (USA)
220V50Hz = CEE 7/VII (EU)
240V50Hz = AS 3112 (Australia/New Zealand)
Duty cycle: Continuous
Motor speed adjustment resolution: 0.1% increments
Display: Backlit LCD, UV resistant
Keypad: Positive action tactile switch keypad
Enclosure: NEMA 4X (IP66), Polyester powder coated aluminum.
Product weight: 24lb. (10.9 Kg)
Literature Download
Instruction Manual PDF C2V & C3V (PDF) (80000-516)
Instruction Manual PDF C2F & C3F (PDF) (80000-514)
Technical Data Sheet (PDF) (85000-096)
DiaFlex® Retro-Fit Kit Information (PDF) (81000-363)
Case Study Farming Application
Communication Protocols
ETHERNET IP (PDF) (80000-533)
PROFIBUS (PDF) (80000-536)
PROFINET (PDF) (80000-537)
MODBUS RTU (PDF) (80000-531)
MODBUS TCP (PDF) (80000-532)

|