|
Oil Content Monitor
|
|
 Leading edge micro-electronics technology combined with decades of optical measurement expertise had allowed HF Scientific to establish n new price/performance threshold for oil content monitoring. The HF OCM incorporates a multi-angle measurement combined with an innovative calculation algorithm to drastically improve the reliability of the system by automatically compensating for bubbles, suspended solids and fouling of the sample chamber. HF Scientific has more than twenty years experience in the Marine Industry with thousands of Oil Content Monitors in successful marine service.
|
|
STANDARD FEATURES:
Automatic Compensation Technology:
Superior compensation for the presence of solids, fouling, and bubbles.
Easy Access Flow Through Cell:
Simple to clean and calibrate. Calibration kit includes Zero and 15 PPM standards for simple use by ship's personnel.
Easy To Service:
Single PC board design provides simple and fast on-board repair in the event of a failure.
One Touch Calibration:
Computerized re-calibration is accomplished in seconds.
Made in the USA
|
|
|
SPECIFICATIONS
|
| Range: |
0-30 ppm, Trend to 50 ppm |
| Response Time: |
1 to 8 seconds |
| Roll: |
Up to 22.5° |
| Sample Pressure: |
0.1 to 8 bar / 1.45 to 116.03 psi |
| Sample Temperature: |
1 to 50°C / 32° to 112°F |
| User Alarms: |
2 User programmable up to 30 ppm |
| User Alarm Rating: |
1 Form A Solid State 230 VAC 2A Zero Crossing
1 Form C 230VAC 2A |
| System Alarm: |
Form C 30 VDC 2A |
| Light Source: |
Pre-focused White Light |
| Display: |
Multi-line LCD |
Environmental:
Temperature
Humidity
Vibration
|
0 to 60°C/32° to 140°F
Up to 95%
2 tp 13.2Hz ± 1mm amplitude, 13.2 to 80 Hz with acceleration to 7G |
| Power Supply: |
90-250VAC 47 / 90Hz |
| Enclosure: |
NEMA 4X, IP66 |
| Freight Dimensions: |
12.5 X26 X 16 inches, 15 lbs (31.8X 66 X 40.6 cm, 6.8kg) |
| Certifications: |
IMO MEPC 60(33), CE, CSA, UL
US Coast Guard Approval No. 162.050 / 3025 / 0 |
|
Oil Content Monitor Instruments and Accessories
|
Catalog Number
|
Description |
|
|
Instruments |
|
19601
|
Oil Content Monitor with Calibration Kit (90 - 240 VAC) MEPC 60(33) - U.S. Coast Guard approved. Includes a multi-line LCD Display, alarm relay, calibration kit, desiccant cartridge, and an operator's manual. |
|
20072
|
Marine Bilge Alarm with Calibration Kit 115/230 Volt |
|
|
Accessories for the 19601 |
|
19610
|
Desiccant Cartridge Replacement |
|
19611
|
Calibration Kit (Includes zero and 15ppm standards.) |
|
19612
|
Replacement Electronic Module (Includes a PC Board with optical components and tubing.) |
|
50318
|
Isolated 4-20 mA Output (Factory installed.) |
|
|
Accessories for the 20072 |
|
81033
|
Amplifier PC Board Assembly |
|
81009
|
Block Sensor Assembly |
|
81095
|
Brush, Cleaning, Bilge Alarm Sensor |
|
81007
|
Bulbs for Re-circulate and Overboard Lamps |
|
81025
|
Control Panel Complete with Digital display Lamps & Switch |
|
|
|
|
81034
|
Digital Board Assembly |
|
81080
|
Field Service Kit. Includes an in-line calibrator, light detector assembly, pre-aligned lamp assembly, photodiode assembly, side panel assembly, power supply board, amplifier board, instruction manual, cleaning brush for sensor and two each of the 1/2 amp fuse, 1/4 amp fuse and lamp for re-circulate and overboard lamps. All come packed in a rugged plastic case. |
|
50017
|
Fuse, 1/4 amp Slo-Blo (240V) |
|
50016
|
Fuse, 1/2 amp Slo-Blo (120V) |
|
|
|
|
82137
|
IC LM317T or NTE 965 |
|
20098
|
In-Line calibrator (optional) |
|
81099
|
Instruction Manual |
|
80995
|
Light Detector Assembly |
|
81010
|
Measurement Detector |
|
|
|
|
81032
|
PC, Mother Board Assembly |
|
81030
|
Power Supply PC Board Assembly |
|
80134
|
Relay P & B 12 Volt |
|
80996
|
Source Lamp Assembly |
|
70858
|
Standard OCBA Calibration |
|
|
