KTV,Tubular,Valves,Level,Gauges,Kenco,Engineering

KTV Tubular Valves For Level Gauges From Kenco Engineering


KTV Tubular Valves For Level Gauges

KTV,Tubular,Valves,Level,Gauges,Kenco,EngineeringApplication:
The KENCO Tubular Valve (KTV), when used with a KENCO "SAFEGUARD" level gauge or KENCO "EPG" level gauge, provides maximum operator safety and environmental protection from a potential gauge glass failure. The KTV is designed for service in low to medium pressure applications up to 500 psig.

Features:

  • The 1/8" thick o-ring provides for easy installation of the glass and requires less wrenching of the packing nut to seal

  • Positive O-ring seal gauge glass connection

  • 1/2" OR 3/4" MNPT rigid vessel connections

  • Ball check shut off

  • Inline vent and drain connection for easy glass cleaning

  • Straight pattern design

  • Braided PTFE stem packing

  • Flanged vessel connections available

  • All valves are supplied with 316 S.S. valve stems, ball checks and glass packing washer

  • The bodies are precision investment castings with each body pressure tested to assure quality

Specifications:
PROCESS CONNECTIONS:
KTV50 = 1/2" MNPT Vessel Connection and 5/8" O.D. Gauge Glass Connection
KTV75 = 3/4" MNPT Vessel Connection and 3/4" O.D. Gauge Glass Connection
KTV50FL = 1/2" 150# RF Flange and 3/4" O.D. Gauge Glass Connection
KTV75FL = 3/4" 150# RF Flange and 3/4" O.D. Gauge Glass Connection
KTV10FL = 1" 150# RF Flange and 3/4" O.D. Gauge Glass Connection
KTV15FL = 1 1/2" 150# RF Flange and 3/4" O.D. Gauge Glass Connection
KTV20FL = 2" 150# RF Flange and 3/4" O.D. Gauge Glass Connection

VALVE BODY MATERIAL:

CS = Zinc Plated Carbon Steel
SS = 316 Stainless Steel

GAUGE GLASS SEAL MATERIAL:
V = Fluorocarbon
A = Aflas
B = Buna-N
E = Ethylene Propylene
T = PTFE Encapsulated Silicone

** IMPORTANT: Pressure and temperature ratings for the valves will be determined by the limitation of the tubular glass.