DRG26 - SS Pressure Gauge w/ Switch

The DRG26 - SS Pressure Gauge w/ Switch all electrical connections are made via a weather proof 90° angle connector plug on the side of the indicator housing. Connections are made via numbered screw terminals inside the connector.
It is recommended that a multi-conductor jacketed cable
be used. The outside diameter of the jacket should be large
enough to ensure that the weather-tight cable gland on the plug
can be tightened down snugly.

The DRG26 - SS Pressure Gauge w/ Switch
Range: Per part number and catalog specifiaction
Accuracy:
20 PSIG Full Scale or Less: ±1.6% of Full Scale
30 PSIG Full SCale or More: ±1.0% of Full Scale
Fittings: 1/2” NPT
Wetted Parts:
DRG26: 316Ti Stainless Steel
DRF34: Brass, Bronze, Copper
Housing Diameter: 4” of 6.3”
Housing Materials:
DRG26: 304 Stainless Steel
DRF34: Aluminum standard, optionally 304 Stainless Steel
Movement:
DRG26: 316 Ti Stainless Steel
DRF34: Brass
Switch Ratings:
Maximum Voltage: 250 VAC
Maximum Current: 0.6 amps
Maximum Power: 10 w/18 VA
Electrical Protection:
Unfilled Housings: NEMA 3R
Oil Filled Housings: NEMA.

DRG26 - SS Pressure Gauge w/ Switch Special Features:

• CCombination Pressure Gauge & Switch
  
• 1 or 2 SPST Switches Possible
  
• Bourdon Tube Design
  
• ±1.0% Accuracy
  
• Pulsation and Vibration Damping
  Through Optional Paraffin Oil Filling

DRG26 - SS Pressure Gauge w/ Switch Product Info
click here to download a PDF file for this product.