PSR,Paddle Type,low Switch,Kobold Instruments

PSR - Paddle Type Flow Switch From Kobold Instruments

Paddle Type Flow Switch KOBOLD PSR Series Paddle Type Flow Switch can be used wherever a simple, economic yet reliable monitoring instrument is required for monitoring flow rates in pipes. The device operates as follows: The flowing medium presses against the paddle of the KOBOLD flow switch. The paddle is fitted to one end of a balance arm which is in direct contact with a prestressed leaf spring. At the other end of the balance arm is a permanent magnet. This magnet actuates a reed contact located within a moveable housing outside the media.

The reed contact switches on or off depending on the position of the permanent magnet and the switch housing. The status of the switch may then be used to electrically control the fluid flow. The movable reed switch on the Kobold PSR Paddle Type Flow Switch allows the contacts to be set either normally open (N/O) or normally closed (N/C). The PSR series Paddle Type Flow Switch is mounted in an integral TEE piece of either brass or stainless steel construction. Fitting sizes range from 1/4" to 1-1/2" NPT.

Special Features:

  • Switch Point Adjustable

  • Easy to Install

  • Brass or SS Construction

  • Low Cost

  • Maximum Pressure: 1450/

  • 3600 PSI

Product Specifications:
Max. temperature: 230F
Max. pressure: 1450 PSIG for brass units, 3600 PSIG for SS units
 
 
Materials:
Paddle: SS 304
Leaf spring: SS 301
Beam: SS 301
Locking plate: brass or SS 304
Contact housing: Polyamid, glass reinforced, NEMA 4
Cable: PVC
O-Ring: Buna-N for brass units Viton for SS units
Contact: Reed-switch SPST, N/O or N/C
Maximum contact ratings: 50 VA, (50 Watt, 250 VAC, 1.5 A)
Standard cable length: 5 ft
Orientation: Horizontal Flow