S,Flow Switches,Kobold Instruments

S - Flow Switches From Kobold Instruments

Kobold S Flow Switches KOBOLD S - Flow Switches work on the well known float/variable area principle but without the use of an open conical measuring tube. Instead the instruments use a cylindrical control tube with a conical groove along its axis. This approach allows for higher rates of flow to be monitored in a compact switch. It also allows for greater control of turndown than with traditional conical tube variable area designs. This allows for a precise setpoint in an inexpensive switch. The S - Flow Switches can be used for continuous monitoring of fluids and gas flows to insure that excess or low flow cannot result in damage to the equipment. Applications can be found wherever it is necessary to monitor flow reliably. The S - Flow Switch are available in bodies of either nickel plated brass or stainless steel.

Special Features:

  • Compact Size
  • Maximum Pressure to 5000 PSIG
  • Can Add Up to 4 Switches On Request
  • Direct Reading Scales for Water and Air

Product Specifications:

  • Accuracy: ±4% of full scale
  • Flow media: liquids and gases
  • Mounting: vertical media flow bottom to top
  • Measuring principle: variable area with float and cylindrical control tube
  • Max. temperature: 240°F, with PP or PVDF float: 160°F
  • Max. pressure: 3600 PSIG for Brass units, 5000 PSIG for SS units, 230 PSIG with PP or PVDF floats
  • Housing: Brass or 304 SS
  • Slotted nozzle: Brass or 304 SS
  • Float: Brass, 304 SS, Polypropylene or PVDF
  • Screw fittings: Brass or 304 SS
  • Seals: Buna-N for Brass units, Viton for SS units
  • Electr. switch housing: Plastic
  • Mode of electr. protection: NEMA 4X/ IP 65
  • Reed contact: standard N/O max. 50VA, special SPDT max. 30VA UL, CSA approved

Additional Product Info

Download Specifications