Instrinsically Safe Relay Power Supply

The REL-6 - Instrinsically Safe Relay/Power Supply series provides an intrinsically safe control circuit allowing
simple apparatus (dry contacts) or NAMUR type switches to operate control devices
within hazardous areas.

The REL-6 - Instrinsically Safe Relay/Power Supply
transmits digital signals from hazardous areas.
Sensors according to DIN 19 234 (NAMUR) or mechanical (dry)
contacts may be used as signal transmitters. If desired, the control circuit may be monitored for line breakage (LB)
and/or short circuit (SC) conditions.
The input is galvanically isolated from the output circuit according to DIN EN 50178.
The device is fitted with detachable terminals that greatly simplify the wiring installation.

REL-6 - Instrinsically Safe Relay/Power Supplyr Special Features:

• Terminals: SPDT: 7 (common), 8 (n/o), 9 (n/c)
  Contact load: 250 VAC/2 A/cos .> 0.7
  120 VAC/4A
  40 VDC/2 A resistive load
  Mechanical service life: 107 switching cycles
  Switching delay: approximately 20 ms
  Switching frequency: = 10 Hz
  Case material: Polycarbonate (Macrolon)
  Dimensions: 118 x 20 x 115 mm (H x W x D)
  Protection: IP 20
  Ambient temperature: -20°C to +60°C (-4°F to +140°F)
  Weight: approximately 150 g (5.3 oz.)

REL-6 - Instrinsically Safe Relay/Power Supply Additional Product Info
click here to download a PDF file for this product.