AODD,Pumps,1/2",Non-Metallic,Metallic,Lutz

AODD Pumps 1/2" Non-Metallic And Metallic From Lutz

Non-Metallic AODD Pumps

AODD,Pumps,1/2",Non-Metallic,Metallic,LutzCapacity: Adjustable 0 to 14 GPM

Max/Min Air Pressure:
All Models 100/20 PSI

Dry Lift Capacity at 100 PSI:
Models w/ Teflon Balls 10 ft.
Other Models 15 ft.

Models (Wetted Materials) Max Temp
LPB-1/2" (PP/BUNA N) 150°F
LPT-1/2" (PP/TEFLON) 150°F
LNT-1/2" (NYLON/TEFLON) 150°F
LKT-1/2" (PVDF/TEFLON) 200°F

Applications:
200 l-drum pumping, ink recirculation and feed, chemicals, solvents, acids, soap dispensing, etc.

Features:

  • Absolutely lube-free and non stalling operation
  • Optional with Max-Pass™- valve system
  • Can safely run dry
  • Self-priming dry or wet
  • Centre block made of corrosion-free plastic
  • Few, easily accessible construction parts
  • Flow rate up to 65 l/min
  • Explosion-proof version in compliance with ATEX
  • Directive 94/9/EC, category 2

Benefit:

  • No risk of pump failure due to to poor lubrication
  • No contaminating of the environment or of the product itself by oil vapour
  • Gentle pumping of liquids and pastes
  • Also for viscous liquids and large solid containing fluids (Max-Pass™)
  • Increased suction capability of the pump (Max-Pass™)
  • Greater freedom of installation ot the pump (Max-Pass™)
  • Possible air leakage arising at connections or in case of diaphragm rupture does not harm the air system
  • Easy maintenance without special tools

Metallic AODD Pumps

AODD,Pumps,1/2",Non-Metallic,Metallic,LutzCapacity: Adjustable 0 to 14 GPM

Max/Min Air Pressure:
All Models 100/20 PSI

Dry Lift Capacity at 100 PSI:
Models w/ Teflon Balls 10 ft.
Other Models 15 ft.

Models (Wetted Materials) Max Temp
LAB-1/2" (ALUMINUM/BUNA N) 180°F
LAT-1/2" (ALUMINUM/TEFLON) 200°F
LSB-1/2" (STAINLESS/BUNA N) 180°F
LST-1/2" (STAINLESS/TEFLON) 200°F

Applications:
200 l-drum pumping, ink recirculation and feed, chemicals, solvents, acids, soap dispensing, etc.

Features:

  • Absolutely lube-free and non stalling operation
  • Can safely run dry
  • Self-priming dry or wet
  • Centre block made of corrosion-free plastic
  • Few, easily accessible construction parts
  • Flow rate up to 65 l/min
  • Explosion-proof version in compliance with ATEX
  • Directive 94/9/EC, category 2

Types:

  • DMP 1/2" Aluminium for neutral and inflammable liquids
  • DMP 1/2" Stainless steel for neutral, aggressive and
  • highly inflammable liquids

Benefit:

  • No risk of pump failure due to to poor lubrication
  • No contaminating of the environment or of the product itself by oil vapour
  • Gentle pumping of liquids and pastes
  • Flow rate and pressure can be regulated continuously
  • No dynamic seals
  • Possible air leakage arising at connections or in case of diaphragm rupture does not harm the air system
  • Easy maintenance without special tools