Lutz Drum Pump RE-SS Ex
For Complete Drum Drainage
USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - firstname.lastname@example.org
The pump tube RE-SS Ex is suitable for applications, in which highly toxic, expensive and sensitive inflammable liquids need to be drained almost completely from drums and containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Gasoline, solvents, alcohols, amines, benzene, toluene, xylene, perfume oils, paints and lacquers, etc.
Suitable for highly inflammable liquids and for use in hazardous locations
Optimized drum drainage with almost no residue left in drum.
Optional with electric or air driven motors
No grease fillings
Explosion-proof in accordance with standards for use in hazardous locations
No problematic tipping for emptying of remaining residual liquid
Maximum product utilisation at reduced drum cleaning and waste disposal costs
No leakage at inclined position or removal of the pump tube
Non-lubrictated, thus no contamination of the liquids pumped
Mechanical seal (MS)
Type of impeller:
Radial-flow impeller (L) for low delivery rate and high delivery head.
27" (700 mm), 39" (1000 mm) and 47" (1200 mm)
(Special lengths on request)
The pump tube is "Zone 0" approved in combination with the original Lutz motors ME I 6 Silver Star (Ex) / MD-1 (Ex) / MD-2 (Ex) in accordance with standards for use in hazardous locations.
Materials: RE-SS Ex
Category: Zone 0
Housing: Stainless steel (316)
Seals: Viton® (FEP coated)
Mechanical seal: Carbon, Ceramic, PTFE, HC-4 (2.4610)
Bearing: pure Carbon
Drive shaft: Stainless steel (316)
Type of impeller: Radial-flow (L)
Nominal diameter: 1.61 in
Temperature of medium:
up to 212 °F
up to 100 °C
Hose connection: 1 1/4" male BSP
Length: 27" /39" / 47"
700 / 1000 / 1200 mm
Operating data Radial-flow (L)
Delivery rate:* up to 18.5 GPM
up to 70 l/min
Delivery head:* up to 49 ft.
up to 15 m wc
Viscosity:** up to 1200 cps
up to 1200 mPas
Motor ME I 6 (Ex) Silver Star
light, easily handled, explosion proof motor,
suitable almost all types of thin-bodied, slightly
viscous, flammable liquids.
rigid aluminium casing, robust high-power motor
- Electronic speed control to constantly ensure
the right flow rate
- Separate ON/OFF buttons with low voltage release
for safety and ease of handling
- 120 V / 60Hz
640 W / 0.85 HP
- Splash-proof in accordance with protection
class IP 54, 16' (5 m) cord, optionally with
remote operating kit.