Lutz, Drum Pump, MMS/MSL-SS 41 Ex, Flammable Liquids

Lutz Drum Pump MMS/MSL-SS 41 Ex For Flammable Liquids

Lutz, Drum Pump, MMS/MSL-SS 41 Ex, Flammable LiquidsThe robust Lutz pump tube with mechanical seal or sealless is suitable for pumping allmost all types of thin-bodied, slightly viscous, aggressive and flammable liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.

Liquid examples:
Gasoline, solvents, alcohols, amines, benzol, toluene, xylene, paints and lacquers, etc.

Features:

  • Suitable for highly inflammable liquids and for use in hazardous areas
  • Optional with electric or air driven motors
  • No grease fillings
  • Explosion-proof in accordance with standards for use in hazardous locations

Benefit

  • Sealless version cannot fail by dry running
  • Lube-free, thus no contamination of the liquid
  • High resistant carbon shaft bearing
  • Two impeller geometries for a tailored pump characteristic

Sealing system:
Mechanical seal (MMS) or sealless construction (MSL)

Type of impeller:
Axial-flow rotor (R) for high delivery rate and low delivery head or Radial-flow impeller (L) for low delivery rate and high delivery head.

Immersion length:
MMS/MSL:
27" (700 mm), 39" (1000 mm) and 47" (1200 mm)

MSL only:
55" (1400 mm), 59" (1500 mm), 63" (1600 mm), 67" (1700 mm), 78" (2000 mm)
(Special length on request)

Lutz, Drum Pump, MMS/MSL-SS 41 Ex, Flammable LiquidsThe pump tube is "Zone 0" approved in combination with the original Lutz motors ME I 6 Silver Star (Ex) / MD-1 (Ex) / MD-2 (Ex) in accordance with standards for use in hazardous locations

Technical Data

Materials MMS-SS MSL-SS
Category: Zone 0 Zone 0
Housing: Stainless steel (316) Stainless steel (316)
Seals: Viton® -
Mechanical seal: Carbon, Ceramic,
 Viton®, SS (316)
-
Bearings: Carbon Carbon
Drive shaft: Stainless steel (316)          Stainless steel (316)
Impeller: ETFE ETFE
Type of impeller: Radial-flow (L)
or Axial-flow (R)
Radial-flow (L)
or Axial-flow (R)
Nominal diameter: 1.61 in
41 mm
1.61 in
41 mm
Temperature of medium: up to 212 °F
up to 100 °C
up to 212 °F
up to 100 °C
Hose connection: 1 1/4" male BSP 1 1/4" male BSP
Length: 27" /39" / 47"
700 / 1000 / 1200 mm
27" / 39" / 47" / 55" /59"
/ 63" / 67" / 78"
700 / 1000 /1200 / 1400 /
1500 / 1600 / 1700 / 2000 mm
   
Operating data Axial-flow (R) Radial-flow (L)
Delivery rate:* up to 53 GPM
up to 200 l/min
up to 27 GPM
up to 100 l/min
Delivery head:* up to 33 ft.
up to 10 m wc
up to 54 ft.
up to 16 m wc
Viscosity:** up to 850 cps
up to 850 mPas
up to 1100 cps
up to 1100 mPas

Motors

Motor ME I 6 (Ex) Silver Star

Lutz, Drum Pump, MMS/MSL-SS 41 Ex, Flammable Liquids

Lutz, Drum Pump, MMS/MSL-SS 41 Ex, Flammable Liquids

A light, easily handled, explosion proof motor, suitable almost all types of thin-bodied, slightly viscous, flammable liquids.

  • Extremely rigid aluminium casing, robust high-power motor 
  • Electronic speed control to constantly ensure the right flow rate
  • Separate ON/OFF buttons with low voltage release for safety and ease of handling
  • 120 V / 60Hz 
    640 W / 0.85 HP
  • Splash-proof in accordance with protection class IP 54, 16´ (5 m) cord, optionally with remote operating kit.

Lutz, Drum Pump, MMS/MSL-SS 41 Ex, Flammable Liquids

Motor MD-1 / MD-2

Lutz, Drum Pump, MMS/MSL-SS 41 Ex, Flammable Liquids

Compact compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Optionally with (MD-2) / without (MD-1) manual operation
  • Delivery flow is easy to control
  • 400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption 32 CFM (0,88 Nm³/min.)

Catalogue Pages Downloads
Catalogue pages Pump MMS/MSL-SS 41 Ex

Performance Curves Downloads
Performance Curve Pump MSL/MMS-SS 41 with Motor ME I 6 (pdf, 0.06 MB)
Performance Curve Pump MSL/MMS-ALU/SS 41 with Motor MD-1/MD-2 (pdf, 0.07 MB)
Dimensional Drawing Pump MMS/MSL-SS 41 with Motor MEI 6 (pdf, 0.07 MB)