Lutz, Drum Pump, MP-PP, Mixing, Pumping

Lutz Drum Pump MP-PP For Mixing And Pumping

Lutz, Drum Pump, MP-PP, Mixing, PumpingThe mixing pump tube MP-PP combines a mixer and a pump in one unit. It´s suitable for mixing and transfering of emulsions, dispersions and suspensions which are tending to separate. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.

Liquid examples:
Emulsions, suspensions, dispersions, paints and lacquers.

Features:

  • Suitable for mixing and pumping of corrosive and neutral, thin-bodied up to slightly viscous liquids in non-hazardous locations
  • Two functions („pumping“ and „mixing and pumping“) in one unit
  • Optional with electric or air driven motors
  • No grease fillings
  • Modular, service friendly design

Benefit

  • Operation mode „pump only“ or „mix and pump“ can be changed without removal by means of a hand lever
  • High pump and mix capacity to ensure best homogenization and emptying within a short time
  • Suitable for drums with bung hole or IBC-container with dome cap as well
  • Lube-free pump tube, thus no contamination of the liquid

Sealing system:
Mechanical seal (MS) or sealless construction (SL)

Type of impeller:
Radial-flow impeller (L) for low delivery rate and high delivery head

Immersion length:
39" (1000 mm) and 47" (1200 mm)
(Special lengths on request)

Technical Data

Materials MP MS-PP MP SL-PP
Housing: Polypropylene Polypropylene
Seals: - Viton®
Mechanical seal: - Carbon, SiC, Viton®,
HC-4 (2.4610)
Bearing:   ETFE/PTFE  ETFE/PTFE 
Drive shaft: Stainless steel (316)  Stainless steel (316)  
Impeller: PP  PP 
Type of impeller:   Radial-flow (L)   Radial-flow (L)
Nominal diameter: 1.96 in
50 mm
1.96 in
50 mm
Temperature of medium:  up to 122 °F
up to 50 °C
up to 122 °F
up to 50 °C
Hose connection:   1 1/4" male BSP  1 1/4" male BSP  
Length:  39" / 47"
1000 / 1200 mm
39" / 47"
1000 / 1200 mm
     
Operating data Radial-flow (L)
Delivery rate:* up to 24 GPM
up to 90 l/min
Delivery head:* up to 69 ft.
up to 21 m wc
Viscosity:** up to 1100 cps
up to 1100 mPas

Motors

Motor B 36 / MI 4
Motor B 36-SC / MI 4 E

Lutz, Drum Pump, MP-PP, Mixing, Pumping

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Light and convenient
  • Optionally with infinitely variable speed controller for a controlled flow rate
  • Internally ventilated
  • 110-120 V / 60Hz,
    640 W / 0.85 HP
  • Open drip proof in accordance with protection class IP 24, double insulated, 16´ (5 m) cord and plug

Lutz, Drum Pump, MP-PP, Mixing, Pumping

Motor B 28

Lutz, Drum Pump, MP-PP, Mixing, Pumping

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Light and convenient
  • Internally ventilated
  • 110-120 V / 60Hz,
    800 W / 1.07 HP
  • Open drip proof, double insulated, 16´ (5 m) cord and plug

Motor B 55-T-5 / MA II 5
Motor B 55-T-7 / MA II 7

Lutz, Drum Pump, MP-PP, Mixing, Pumping

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids. For very aggressive atmospheres an acid-proof motor is available.

  • Robust and powerful
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 110-120 V / 60Hz,
    510 W / 0.68 HP (B 55-T-5)
    700 W / 0.93 HP (B 55-T-7)
  • TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 16´ (5 m) cord and plug

Lutz, Drum Pump, MP-PP, Mixing, Pumping

Motor MD-1 / MD-2

Lutz, Drum Pump, MP-PP, Mixing, Pumping

Compact compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Optionally with (MD-2) / without (MD-1) manual operation
  • Delivery flow is easy to control
  • 400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption 32 CFM (0,88 Nm³/min.)

Motor 4/GT

Lutz, Drum Pump, MP-PP, Mixing, Pumping

Light, easily handled compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Delivery flow is easy to control
  • 220 W / 0.3 HP at 87 PSI (6 bar) operating pressure, air consumption 14 CFM (0,38 Nm³/min.)

Motor MA II 3-12V

Lutz, Drum Pump, MP-PP, Mixing, Pumping

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Robust and powerfull
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 12 V DC,
    260 W / 0.35 HP
  • TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 10´ (3 m) cord with alligator clips

Catalogue Pages Downloads
Catalogue pages Pump MP-PP

Performance Curves Downloads
Performance Curve Pump MP-PP with Motor 4/GT (pdf, 0.06 MB)
Performance Curve Pump MP-PP with Motor B28 (pdf, 0.06 MB)
Performance Curve Pump MP-PP with Motor B36/MI 4 (pdf, 0.06 MB)
Performance Curve Pump MP-PP with Motor B55-T-5/MA II 5 (pdf, 0.06 MB)
Performance Curve Pump MP-PP with Motor MA II 3 - 12V (pdf, 0.06 MB)
Performance Curve Pump MP-PP with Motor MD-1/MD-2 (pdf, 0.06 MB)