Lutz Drum Pump MP-SS Ex For Mixing And Pumping
USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - firstname.lastname@example.org
The mixing pump tube MP-SS Ex combines a mixer and a pump in one unit. It´s suitable for mixing and transfering of emulsions, dispersions and suspensions which are tending to separate. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Emulsions, suspensions, dispersions, paints and lacquers.
Suitable for mixing and pumping of thin-bodied up to slightly viscous highly-inflammable liquids in hazardous locations
Two functions (pumping and mixing and pumping) in one unit
Optional with electric or air driven motors
No grease fillings
Modular, service friendly design
Explosion-proof in accordance with standards for use in hazardous locations
Operation mode pump only or mix and pump can be changed without removal by means of a hand lever
High pump and mix capacity to ensure best homogenization and emptying within a short time
Suitable for drums with bung hole or IBC-container with dome cap as well
Lube-free pump tube, thus no contamination of the liquid
Mechanical seal (MS)
Type of impeller:
Axial-flow rotor (R) for high delivery rate and low delivery head
39" (1000 mm) and 47" (1200 mm)
(Special lengths on request)
pump tube is "Zone 0" approved in combination
with the original Lutz motors ME I 6 Silver Star (Ex) /
MD-1 (Ex) / MD-2 (Ex) in accordance with standards for use
in hazardous locations.
Motor ME I 6 (Ex) Silver Star
light, easily handled, explosion proof motor,
suitable almost all types of thin-bodied, slightly
viscous, flammable liquids.
rigid aluminium casing, robust high-power motor
- Electronic speed control to constantly ensure
the right flow rate
- Separate ON/OFF buttons with low voltage release
for safety and ease of handling
- 120 V / 60Hz
640 W / 0.85 HP
- Splash-proof in accordance with protection
class IP 54, 16´ (5 m) cord, optionally with
remote operating kit.