Lutz, Drum Pump, MMS/MSL-PVDF 41, Concentrated Liquids

Lutz Drum Pump MMS/MSL-PVDF 41 For Concentrated Liquids

Lutz, Drum, Container, Pumps, Non-Flammable LiquidsThe robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.

Liquid examples:
Highly concentrated acids and alkalis, bromic acid, sulphuric acid, nitric acid, dimethyle phthalate, potassium bromate, hydrofluoric acid, etc

Features:

  • Suitable for corrosive and neutral, thin-bodied up to slightly viscous liquids in non-explosive areas
  • Optional with electric or air driven motors
  • No grease fillings
  • Optimized drum drainage
  • Modular, service friendly design

Benefit

  • Sealless version cannot fail by dry running
  • Non-lubrictated, thus no contamination of the liquids pumped
  • All-purpose resistant PTFE shaft bearing
  • Two impeller geometries for a tailored pump characteristic
  • Easy maintenance without special tools
  • Sealing modules of mechanical sealed (MMS) resp. of sealless (MSL) pumps are replaceable

Sealing system:
Mechanical seal (MMS) or sealless construction (MSL)

Type of impeller:
Axial-flow rotor (R) for high delivery rate and low delivery head or Radial-flow impeller (L) for low delivery rate and high delivery head.

Immersion length:
27" (700 mm), 39" (1000 mm) and 47" (1200 mm)
(Special length on request)

Technical Data

Materials MMS-PVDF MSL-PVDF
Housing: PVDF PVDF
Seals: Viton® -
Mechanical seal: Carbon, SiC, Viton®,
HC-4 (2.4610)
-
Bearings: ETFE/PTFE ETFE/PTFE
Drive shaft: HC-4 (2.4610) optional
Stainless steel (316)         
HC-4 (2.4610) optional
Stainless steel (316)
Impeller: ETFE ETFE
Type of impeller: Radial-flow (L)
or Axial-flow (R)
Radial-flow (L)
or Axial-flow (R)
Nominal diameter: 1.61 in
41 mm
1.61 in
41 mm
Temperature of medium: up to 212 °F
up to 100 °C
up to 212 °F
up to 100 °C
Hose connection: 1 1/4" male BSP 1 1/4" male BSP
Length: 27" /39" / 47"
700 / 1000 / 1200 mm
27" / 39" / 47" /
700 / 1000 /1200 mm
   
Operating data Axial-flow (R) Radial-flow (L)
Delivery rate:* up to 48 GPM
up to 180 l/min
up to 24 GPM
up to 90 l/min
Delivery head:* up to 33 ft.
up to 10 m wc
up to 69 ft.
up to 21 m wc
Viscosity:** up to 850 cps
up to 850 mPas
up to 1100 cps
up to 1100 mPas

Motors

Motor B 36 / MI 4
Motor B 36-SC / MI 4 E

mi

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Light and convenient
  • Optionally with infinitely variable speed controller for a controlled flow rate
  • Internally ventilated
  • 110-120 V / 60Hz,
    640 W / 0.85 HP
  • Open drip proof in accordance with protection class IP 24, double insulated, 16´ (5 m) cord and plug

csa

Motor B 28

B28

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Light and convenient
  • Internally ventilated
  • 110-120 V / 60Hz,
    800 W / 1.07 HP
  • Open drip proof, double insulated, 16´ (5 m) cord and plug

Motor B 55-T-5 / MA II 5
Motor B 55-T-7 / MA II 7

B55-T

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids. For very aggressive atmospheres an acid-proof motor is available.

  • Robust and powerful
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 110-120 V / 60Hz,
    510 W / 0.68 HP (B 55-T-5)
    700 W / 0.93 HP (B 55-T-7)
  • TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 16´ (5 m) cord and plug

CSA

Motor MD-1 / MD-2

MD-1 / MD-2

Compact compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Optionally with (MD-2) / without (MD-1) manual operation
  • Delivery flow is easy to control
  • 400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption 32 CFM (0,88 Nm³/min.)

Motor 4/GT

4/GT

Light, easily handled compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Delivery flow is easy to control
  • 220 W / 0.3 HP at 87 PSI (6 bar) operating pressure, air consumption 14 CFM (0,38 Nm³/min.)

Motor MA II 3-12V

B55-T

Light, easily handled, high-performance motor, suitable for almost all types of thin-bodied, slightly viscous, aggressive and non-flammable liquids.

  • Robust and powerfull
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 12 V DC,
    260 W / 0.35 HP
  • TEFC splash-proof in accordance with protection class IP 54, double insulation with protective ground connection, 10´ (3 m) cord with alligator clips

 

Catalogue Pages Downloads
Catalogue pages Pump MMS/MSL-PVDF 41

Performance Curves Downloads
Performance Curve Pump MSL/MMS-PVDF 41 with Motor 4/GT (pdf, 0.06 MB)
Performance Curve Pump MSL/MMS-PVDF 41 with Motor B28 (pdf, 0.06 MB)
Performance Curve Pump MSL/MMS-PVDF 41 with Motor B36/MI 4 (pdf, 0.06 MB)
Performance Curve Pump MSL/MMS-PVDF 41 with Motor B55-T-5/MA II 5 (pdf, 0.06 MB)
Performance Curve Pump MSL/MMS-PVDF 41 with Motor MA II 3 - 12V (pdf, 0.06 MB)
Performance Curve Pump MSL/MMS-PVDF 41 with Motor MD-1/MD-2 (pdf, 0.06 MB)

Dimensional Drawings Downloads
Dimensional Drawing Pump Tube MSL/MMS-PP 41 / PVDF 41 / Alu 41 with Motor 4/GT (pdf, 0.07 MB)
Dimensional Drawing Pump Tube MSL/MMS-PP 41 / PVDF 41 / Alu 41 with Motor B28 (pdf, 0.07 MB)
Dimensional Drawing Pump Tube MSL/MMS-PP 41 / PVDF 41 / Alu 41 with Motor B36/MI 4 (pdf, 0.07 MB)
Dimensional Drawing Pump Tube MSL/MMS-PP 41 / PVDF 41 / Alu 41 with Motor B55T/MAII (pdf, 0.07 MB)
Dimensional Drawing Pump Tube MSL/MMS-PP 41 / PVDF 41 / Alu 41 with Motor MAII 3 - 12V (pdf, 0.07 MB)