The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping allmost all types of thin-bodied, slightly viscous, aggressive and flammable liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.

Liquid examples:
Gasoline, solvents, alcohols, amines, benzol, toluene, xylene, paints and lacquers, etc.

Features:

Suitable for highly inflammable liquids and for use in hazardous areas
Optional with electric or air driven motors
No grease fillings
Explosion-proof in accordance with standards for use in hazardous locations

Benefit

Sealless version cannot fail by dry running
Lube-free, thus no contamination of the liquid
High resistant carbon shaft bearing
Two impeller geometries for a tailored pump characteristic

Sealing system:
Mechanical seal (MMS) or sealless construction (MSL)

Type of impeller:
Axial-flow rotor (R) for high delivery rate and low delivery head or Radial-flow impeller (L) for low delivery rate and high delivery head.

Immersion length:
MMS/MSL:
27" (700 mm), 39" (1000 mm) and 47" (1200 mm)

MSL only:
55" (1400 mm), 59" (1500 mm), 63" (1600 mm), 67" (1700 mm), 78" (2000 mm)
(Special length on request)

The pump tube is "Zone 0" approved in combination with the original Lutz motors ME I 6 Silver Star (Ex) / MD-1 (Ex) / MD-2 (Ex) in accordance with standards for use in hazardous locations

Motors

Motor ME I 6 (Ex) Silver Star

A light, easily handled, explosion proof motor, suitable almost all types of thin-bodied, slightly viscous, flammable liquids.

Extremely rigid aluminium casing, robust high-power motor
Electronic speed control to constantly ensure the right flow rate
Separate ON/OFF buttons with low voltage release for safety and ease of handling
120 V / 60Hz
640 W / 0.85 HP
Splash-proof in accordance with protection class IP 54, 16' (5 m) cord, optionally with remote operating kit.

Motor MD-1 / MD-2

MD-1 / MD-2 Compact compressed air motor for handling neutral and aggressive liquids.

Overload-proof
Optionally with (MD-2) / without (MD-1) manual operation
Delivery flow is easy to control
400 W / 0.54 HP at 87 PSI (6 bar) operating pressure, air consumption�32 CFM (0,88 Nm³/min.)

Catalogue Pages Downloads
Lutz Pump Catalogue

Performance Curves Downloads
MSL/MMS-SS 41 with Motor 4/GT
MSL/MMS-SS 41 with Motor B28
MSL/MMS-SS 41 with Motor B36/MI 4
MSL/MMS-SS 41 with Motor B55-T-5/MA II 5
MSL/MMS-SS 41 with Motor MA II 3 - 12V
MSL/MMS-SS 41 with Motor MD-1/MD-2

Dimensioanl Drawing Download
MMS/MSL-SS 41 with Motor MEI 6

METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch

USA Toll Free:
1-800-730-0302
Telephone:
(416) 240-1920
Fax:
(416) 240-7021
Email and Website:
sales@metexcorporation.com www.metexcorporation.com
Head Office:
12 Newbridge Road
Toronto, ON
M8Z 2L7 Canada