Myron L Products
Digital Handheld Instruments
Analog Handheld Instruments
Specialty Analog Handheld Meters
POOLPRO Pool & Spa Test Tool
USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - email@example.com
Accuracy you can trust
Since 1957, the Myron L Company has designed and manufactured highly reliable analytical instruments for a wide variety of demanding applications. Thousands of professionals around the world rely on the performance of our instruments every day. Uses range from boiler water testing to ultrapure water control to medical instruments for artificial kidney machines.
We are proud of the trust our handheld instruments and monitor/controllers have earned. We have continued to build on that trust and have reached a new and greater level of quality and performance in the latest instrument in our line of handheld tools: The POOLPRO is an extremely reliable, precise, affordable, multi-parameter instrument for testing water quality in any pool or spa. If you own, operate or service a commercial pool or spa, you need a POOLPRO.
Every Pool Professional Needs a POOLPRO
There are many factors affecting the comfort and sanitation of pool and spa water and the functioning of the equipment and structures that hold it. A variety of test kits can be used to measure these factors, but the powerful POOLPRO is the most comprehensive testing tool available for any pool or spa. You get fast, lab-accurate results for pH, Free Chlorine, TDS, ORP, Mineral/ Salt Concentration, Conductivity, and Temperature. And every POOLPRO comes with an internal LSI/Hardness calculator for on-the-spot water balance analysis.
Maintain Balanced Water
POOLPRO tests basic parameters required to balance water so you can protect your pool or spa shell, plumbing, and all other related equipment from damage by etching or build-up and stains.
POOLPRO gives you instant, precise pH readings. Using colored strips or solutions can produce wildly varying, inaccurate results. pH is the most important factor in water balance and must be kept within a recommended range that also optimizes the sanitizers ability to work.
POOLPRO is also a quick and easy way to stay on top of Total Dissolved Solids (TDS). TDS is another factor in water balance and profoundly impacts water taste and bather comfort.
In a commercial pool or spa you must carefully monitor and control TDS on a regular basis to maintain acceptable levels. This prevents having to eventually drain and refill the pool or spa with new, lower TDS water which is not only costly, but may be illegal.
POOLPRO measures and reports temperature to one tenth of a degree with every sample taken. Temperature plays a role in water balance, the growth of microorganisms, and especially affects bather comfort.
Analyze Water Balance On-the-Spot
The POOLPRO now features an LSI calculator that makes it easy to analyze the scaling nature of water in the lab or in the field. Using a calcium carbonate saturation index algorithm developed by Dr. Wilfred Langelier in 1936, the calculator computes the saturation index of a sample based on measured and inferred values for pH, temperature, hardness and alkalinity. You can then change any of these values in user adjust mode to analyze the effect of the change on water balance. User mode also allows you to input measured values for alkalinity and hardness as determined by other independent testing for a precise saturation index value.
An index between -0.5 and +0.5 indicates balanced water
Convert Hardness Units
Within the LSI Calculator is a Hardness calculator that allows you to select either ppm or grains of hardness units for saturation index calculation. The hardness unit conversion is based on the following equivalency: 17.1 ppm (mg/L) = 1 grain. The hardness range is limited to 0.0 - 1710 ppm and 0.0 - 100 grains of hardness in the POOLPRO.
Keep Water Sanitary
Myron Ls POOLPRO provides the fastest, most precise, easy-to-use method of obtaining Oxidation Reduction Potential (ORP or REDOX) readings to check the true level of effectiveness of all sanitizers in any pool or spa. Tests are available that determine the amount of free and total chlorine, bromine, and other sanitizers.
Automatic control systems that rely on ORP to monitor and control sanitizer levels require manual testing with separate instrumentation as a necessary check to ensure the system is working properly.
Measure Free Chlorine
POOLPRO now features the ability to convert Oxidation Reduction Potential measurements from mV to parts per million free chlorine. mV and ppm free chlorine are the two most commonly used sanitizer measurement units in water quality management. The mV to ppm free chlorine conversion algorithm is based on a published conversion curve and bench testing performed at the Myron L Company. The accuracy of low-range ppm free chlorine readings has been increased by extrapolating from the published data. With this new feature Myron L instruments can measure a dynamic range of sanitizer concentrations that is wider than the range of a colorimetric test kit.
POOLPRO conveniently tests for mineral/salt concentration at the press of a button. In saltwater systems, manual testing with separate instrumentation is necessary to ensure enough sodium chloride is present to generate the chlorine required to sanitize the water. System components can scale or fail and must be re-calibrated as part of regular maintenance.
Reportable Records with Bluetooth® Technology
POOLPRO makes it easy to record, analyze, archive, and report water quality data with the optional bluDock accessory package. The bluDock is a fast, easy way to comply with recordkeeping and reporting requirements. This powerful option enables the POOLPRO to communicate wirelessly with any computer configured to recognize Bluetooth devices. The data can then be imported into any program necessary for record-keeping and analysis.
Bluetooth is a registered trademark of Bluetooth SIG.
Simply The Best
POOLPRO is lightweight, portable, buoyant, waterproof, easy-to-calibrate, and easy-to-use. Simply rinse and fill the cell cup by dipping the POOLPRO in the water, then press the button of the parameter you wish to measure. You immediately get a standard, numerical digital readout eliminating all subjectivity. Up to 100 date-timestamped readings can be stored in POOLPROs non-volatile memory.
POOLPRO is the pool professionals tool of choice for comprehensive, efficient, cost-effective testing of any pool or spa water.
bluDock Bluetooth Wireless Communication Package
Package includes POOLPRO hardware modification that allows the unit to communicate wirelessly with a personal computer configured for wireless device communication. Package also includes U2CI software application that will operate on Windows XP, Vista and 7, and Macintosh OSX based computer systems. NOTE: Bluetooth® is a registered trademark of Bluetooth SIG. The bluDock Bluetooth module is a registered Bluetooth device. Model #: BLUDOCK
More From Myron L
PoolMeter is another high quality Myron L instrument for measuring TDS/NaCl/Salt in any pool or spa. We also offer Alkalinity Test Kits to measure Total Alkalinity.
All Myron L POOLPRO's have a Two (2) Year Limited Warranty. The pH/ORP sensors have a Six (6) Month Limited Warranty. Warranty is limited to the repair or replacement of the POOLPRO only, at our discretion. Myron L Company assumes no other responsibility or liability.
Range of readings
Features & Benefits