Calibration Columns (Cylinders) From Neptune Chemical Pump Company Inc
Neptune Calibration Columns (Cylinders) provide a fast, easy and economical means of checking the flow rate of your chemical metering pump.
The most accurate test of metering pump flow rate is to measure the drawdown rate on the suction side while leaving the discharge undisturbed in its normal steady state operating condition. Pump flow rate verification on a periodic basis or after maintenance is important to system accuracy.
Calibration Columns (Cylinders) can also be used to determine if check valves are worn or dirty.
It is recommended to size the Calibration Columns (Cylinders) for a minimum of 30 seconds with a scale that will produce an easily readable differential within the test period.
Calibration Columns (Cylinders) Features:
Rugged PVC construction with slip on top caps for top filling and easy cleaning
Shielded glass models available for acids and strong chemicals
Calibration scales are protected from harsh chemical by Mylar lamination.