DO 6+ Meter, Portable Dissolved Oxygen Meter, Oakton Instruments

DO 6+ Meter Portable Dissolved Oxygen Meter from Oakton Instruments

DO 6+ Meter, Portable Dissolved Oxygen Meter, Oakton InstrumentsHigh accuracy combined with economical pricing.

  • Low-maintenance, galvanic probe requires no warm-up time

  • Includes protective rubber boot which also functions as a benchtop stand

These meters provide a great value. The ranges work to test water quality in wastewater, surface water, ground water, or drinking water. A clear LCD display shows results in ppm or mg/L with enunciators to aid in use and troubleshooting. Six simple buttons allow for freezing readings, toggling between display units and temperature results, setup, calibration, and automatic barometric and salinity compensation after manual parameter inputs. Additional benefits of the simple design allow you to view electrode slope, zero offset, and millivolt values for electrode diagnostics.

See how to fill your DO probe

Measures Dissolved oxygen, C
% saturationRange 0 to 200.0%
% saturationResolution 0.1%
% saturationAccuracy +/-1.5% fullscale
% saturationCalibration 100%, 0%, and offset
mg/l (ppm)Range 0.00 to 20.00 mg/L(ppm)
mg/l (ppm)Resolution 0.01 mg/L (ppm)
mg/l (ppm)Accuracy +/- 1.5% fullscale
mg/l (ppm)Calibration 100%, 0%, and offset
TemperatureRange 0.0 to 50.0C
TemperatureResolution 0.1C
TemperatureAccuracy +/-0.5C
TemperatureCalibration Yes
ATC Automatic from 0 to 50C
Salinity correction Manual input with meter calculated correction; Range: 0.0 to 50.0 ppt; Resolution: 0.1 ppt
Barometric pressure correction Manual input with meter calculated correction; Range: 500 to 1499 mm Hg; Resolution: 1.0 mm Hg
Built-in Stand Yes
Dimensions 6 3/16" x 3 3/8" x 1 11/16" (15.7 x 8.5 x 4.2 cm)
Shipping weight 1.2 lbs (0.6 kg)
Power 4 1.5 V AA batteries, 200 hours continuous use

Back to Dissolved Oxygen Portable Meters