Conductivity/TDS Cells Industrial Series from Oakton Instruments

Conductivity/TDS Cells: Industrial Series features built-in temperature compensation.


Industrial,Series,Conductivity,TDS,Cells,Oakton,Instruments Designed for continuous in-line monitoring
Industrial,Series,Conductivity,TDS,Cells,Oakton,Instruments Feature stripped ends for easy wiring

Choose from four different cell constants.
• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)
• K = 0.01 for resistivity measurements (at or below 2 µS)

Install these rugged cells in a pipeline, or submerse in a tank.

Dimensions: 142 mm L x 12 mm dia. Shpg wt 0.5 lb.


Use with CON 100, CON 200, CON 1000, and RES 1000 controllers

Back to Conductivity / TDS Cells