Metex Corporation
Oakton Instruments
Conductivity/TDS Controllers
1/8 DIN Conductivity Controller Eutech CON 200 Controller
USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - sales@metexcorporation.com
1/8 DIN Conductivity Controller
These sturdy, compact controllers withstand voltage fluctuations from 85 to 250V AC/DC! They are ideal for installation were electrical fluctuations are common, or install them in series throughout areas of differing electrical conditions. Advanced setup mode lets you select cell constant, temperature coefficient, manual or automatic temperature compensation, hysteresis band and more. It also lets you view previous calibration points. The 1/8 DIN housing is ready to install in standard panels and NEMA rated boxes. Includes mounting hardware; accepts probes with stripped ends and Pt 100 RTD ATC elements. Measures Conductivity, °CConductivityRange 0.00 to 20.00 µS, 0.0 to 200.0 µS, 0 to 2000 µS, 0.0 to 10.00 mS, 0.00 to 20.00 mS, 0.0 to 200.0 mS ConductivityResolution 0.01 µS; 0.1 µS; 1 µS; 0.01 mS; 0.1 mS ConductivityCell constant 0,1, 1, or 10 Calibration one point, slope calibration Control accuracy ±1% full-scale TemperatureRange -10.0 to 110.0 °C TemperatureResolution 0.1°C TemperatureAccuracy ±0.5°C TemperatureCalibration offset up to ±10°C Control type on/off Number of inputs one Number of set points two OutputControl 2 SPDT nonpowered relays, 6A at 110 VAC; 250 VAC max. OutputCurrent 4-20 mA output, isolated Hysteresis 0 to 10% of range, adjustable for each set point Electrical isolation yes, galvanically Temperature Sensor Pt 100 Temperature Compensation automatic or manual, from 0 to 100ºC Password protection two levels Display 4-digit, 14 segment scrolling LED Operating Temperature 0 to 50ºC Housing 1/8 DIN Dimensions 1.9" x 3.8" x 6" (4.8 x 9.6 x 1.5 cm) Shipping weight 0.5 lb (0.2 kg)
|