CON Conductivity Transmitter from Oakton Instruments

CON Conductivity Transmitter has a two-wire design with input-to-output isolation ensures clean signal transmission even in noisy locations.


CON,Conductivity,Transmitter,Oakton,Instruments Weatherproof IP54-rated housings—suitable for harsh environments
CON,Conductivity,Transmitter,Oakton,Instruments Accommodate virtually all Conductivity or TDS two-wire applications
CON,Conductivity,Transmitter,Oakton,Instruments Housing is field mountable


Simple, reliable blind transmitters are ideal for connecting to your PLC for advanced control systems. Or, connect to a recorder for a low cost documentation system. Transmitters can be installed in series with each transmitter isolated from the other to prevent disruption of operations even if one transmitter fails. These economical transmitters can be installed at multiple sites within a plant.

Click below to download Acrobat (.pdf) file of:
CON Conductivity Transmitter product bulletin
CON Conductivity Transmitter manual

Range 0 to 20.00 mS
Accuracy ±2% FS
Calibration two-point
ATC 2% per °C
Input conductivity cells with cell constant = 1.0 (use only with 3-wire cells)
Output 4 to 20 mA
Operating Voltage 12 VDC to 24 VDC
Load 100 max load for 12 VDC and 600 max load for 24 VDC
Dimensions 3" x 3" x 1.1" (7.6 x 7.6 x 2.9 cm)
Shipping weight 2 lbs (0.9 kg)

Back to TDS / Conductivity Transmitters