Partlow MRC 5000 Circular Chart Recorders
Partlow MRC 5000
The Partlow MRC 5000 Circular Chart Recorders were designed with simplicity and functionality in mind. Its operation is so easy that all of its instructions fit on one 4 X 6 card. It comes in two basic versions for trend recordingone or two pens.
The straightforwardness of the Partlow MRC 5000 Circular Chart Recorders is immediately evident just by looking at the units face. The operator inter-face, a four-digit display with three-button keypad, is made for simple daily operation and easy configuration. A clear prompting scheme provides rapid access to all configuration and operation data.
The operator interface also provides access to test and calibration facilities with a convenient dual function MODE switch. As if configuring the Partlow MRC 5000 Circular Chart Recorders wasnt easy enough already, theres also an optional Configurator port for ultimate programming ease. Using the optional PC program, parameters can be modified, saved, and downloaded in seconds.
A quick look inside the casing and at the chart itself also speaks to the straightforward, functional design of the Partlow MRC 5000 Circular Chart Recorders. You will find just one jumper to configure each port!
The two pens, each with configurable spans, are positioned smoothly without any slidewire feedback; this simplifies design and improves reliability. In addition, the 10 chart rotates at the speeds you select.
Finding a place to install this recorder is easy, with its com-pact 2.5 panel depth and short 1.3 protrusion from the front panel. And, dont worry about harsh environments