Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)

SWI TS01E Series | Fixed Set-Point Temperature Switch

USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - sales@metexcorporation.com

Sensors and Switches are mechanical-type sensing devices that do not require power to operate. Engineered based on time-proven principles such as buoyancy, conductivity, magnetic latching, capacitance and more, SWI sensors and switches are manufactured to provide reliable industrial process measurement year after year. Click on a sensing device below to learn more about our available sensors and switches product line.

SWI TS01E Series | Fixed Set-Point Temperature Switch

Description

The TS01E Series Temperature Switch is designed to integrate to independent relays that change states using fixed temperature points within one device. The TS01E serves as an electronic thermostat control with probe mounted thermistors that sense the change in temperature within the media. In addition, the unit contains no mechanical components that can cause delay or chatter during operation. The TS01E is comprised of 316 stainless steel and is made to order in 1/4", 1/2" or 3/4" NPT mounting connections.

Principles of Operation

As the process temperature changes, the single or dual thermistors contained within the probe change resistance. The variation is compared to the factory set switch points and results in the changing state of relays. The differential between the relay states has sufficient hysteresis to avoid chatter during temperature transients.

SWI TS01E Series

Features

  • Single Piece Assembly
  • Four Integrated Temperature Set Points
  • Horizontal or Vertical Mounting Orientation
  • Robust & Accurate Embedded Electronics
  • No Calibration Required
  • Fast, Responsive and Accurate Temperature Control
  • No Moving Parts

Applications

  • Fuel Tanks
  • Chemical Processing Tanks
  • Generators
  • Pump Control and Protection
  • Combustion Fluid

Electrical

  • Input: 12 to 24 VDC
  • Output: Two Independant Relay Outputs

    Min: -20 °F ±10 °F (-29 °C ±-12 °C)

    Max: +250 °F ±10 °F (+121 °C ±-12 °C)

  • Power Consumption: 50 mA

  • Repeatability: > 96%

  • Response Time: < 1 Second

  • Warm-up Time: < 3 Seconds

Environmental

  • Ambient Temperature: -65º to +225º F (-54º to +107º C)
  • Process Temperature: -45º to +275º F (-42.8º to +135º C)
  • Process Pressure: 1,000 PSIG (68.9 bar)
  • Construction Material: 316L Stainless Steel

<< Back >>

METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch