pH Transmitters From Sensorex

Sensorex - pH Transmitters

pH,Transmitters,SensorexLow Cost, 2-Wire, 4-20 mA Transmitters for pH Interface to PLC and Dataloggers

For low cost signal conditioning, Sensorex is pleased to offer low cost, True 2-wire 4-20 mA pH transmitters. Use these to interfacing a pH electrode output into your PLC, datalogger, or any other 4-20mA input device. For economy reasons, Both models are "blind". Choose the lower cost non-isolated PHMA,

or the EMIT-pH for input to output isolation. Power supply required is 12-36 VDC.

SG200C 12mm X 150mm Sealed General Use
SG201C 12mm x 150mm Refillable
SG200CD 12mm x 150mm Sealed Dbl Junction
SG300C 9.5mm x 300mm Sealed Long & Thin
SG301C 9.5mm x 300mm Refillable
SG900C 6mm x 150mm Sealed Semi-Micro
SG901C 6mm x 150mm Refillable
SG360CD 12mm x 150mm Flat Double Junction


pH Electrode 4-20mA Transmitter

Product Features
True 2-Wire Design
Low Cost
Non-Isolated 4-20 mA Transmitters
Isolated 4-20 mA Transmitters
Provide OPTIMUM Service Life
pH Electrode 4-20mA Transmitter Specifications

All of our laboratory electrodes are supplied with a 30" cable (76 cm), soaker storage bottle or soaker cap, and a BNC connector at no additional charge.  Many other connectors are available, some of them for a modest additional charge. Special cable lengths are readily available at additional charge.

Our selection guide will assist you in choosing the appropriate electrode to meet your specific requirements. Should you have any questions, or require additional assistance, please contact Sensorex