Stainless,Steel,Conductivity,Sensors,Sensorex

Stainless Steel Conductivity Sensors From Sensorex


Sensorex - Stainless Steel Conductivity Sensors

Stainless,Steel,Conductivity,Sensors,SensorexMultiple 316SS conductivity sensors are available. Our boiler sensors are designed for operating conditions up to 200 degrees C and 250 psig. For general use applications both 3/4" NPT and 1/2" NPT models are available. For high pressure applications our HP series will handle pressures up to 300 psig at 100 degrees C.

Boiler Conductivity Sensors 316 SS Construction

Sensorex boiler conductivity sensors use 3/4" male NPT threads, and both the body and the measuring pin are constructed of 316 stainless steel. They feature a special thermally resistant PEEK insert and high temperature "O" rings. Two models are available, and each model may be ordered with or without ATC elements depending upon your application requirements. The CS675HT and CS675HTTC feature a 1" insertion depth beyond the 3/4" MNPT threads. The models CS676HT and CS675HTTC provide 3" insertion depth past the 3/4" MNPT threads. All boiler probes are supplied with 6" Teflon coated leads for Junction Box connection and extension. Cell K value of 1.0 is standard. Longer cable lengths can be supplied at additional cost.

Model
Description
CS675HT
Boiler Probe - High Temperature
CS675HTTC
Boiler Probe - High Temp + ATC
CS676HT-
Boiler Probe - High Temp (Longer)
CS676HTTC
Boiler Probe - HT with ATC (Longer)

 

Stainless,Steel,Conductivity,Sensors,Sensorex
Product Features
 
Choose the type of Conductivity Sensor for your requirement:
 
Cooling Towers
 
Boilers
 
Chillers
 
Water Quality
 
Stainless,Steel,Conductivity,Sensors,Sensorex

General Use 316 SS 3/4" and 1/2" Sensors

Models CS675, CS676 and CS650 are designed for general use conductivity measurements. The CS675  and CS676 features 3/4" MNPT threads and the CS650 incorporates 1/2" MNPT threads. Pins and body are 316-SS construction. Standard cell K values are 0.1, 1.0 and 10.

Model
Description
CS675
3/4" Conductivity Sensor
CS675TC-
3/4" Sensor with ATC
CS676
3/4" Conductivity Sensor (Longer)
CS676TC-
3/4" Sensor with ATC (Longer)
CS650
1/2" Conductivity Sensor
CS650TC-
1/2" Sensor with ATC

.

High Pressure Conductivity 316 SS 3/4" & 1/2"

Models CS675HP, CS676HP and CS650HP are designed to withstand upto 300 psig. The CS675HP and CS676HP features 3/4" MNPT threads and the CS650HP incorporates 1/2" MNPT threads. Pins and body are 316-SS construction. Standard cell K values are 0.1, 1.0 and 10.

Model
Description
CS675HP
3/4" HP Conductivity Sensor
CS675HPTC
3/4" HP Conductivity Sensor with ATC
CS676HP
3/4" HP Conductivity. Sensor (Longer)
CS676HPTC-
3/4" HP Sensor with ATC (Longer)
CS650HP
1/2" HP Conductivity Sensor
CS650HPTC
1/2" HP Sensor with ATC

Special cell K values such as 0.01 and 10 and others are available in quantity orders. Special packaging and design are also available. Contact Sensorex to discuss your specific conductivity measurement requirements.