Double Head Adjustable Output Metering Pump - 170DM1 Classic Series From Stenner

Double Head Adjustable Output Metering Pump

  • 25 psi (1.7 bar)

  • max 10 gpd (38 lpd)

How It Works

Stenner’s double head adjustable output metering pump is built with four detachable components: the motor, feed rate control, and two pump heads. Outputs are dependent upon three factors: the rpm of the motor gears, the percentage setting on the feed rate control, and the size of the peristaltic pump tube. All Stenner metering pumps have a 3-point roller design in the pump head, which acts as a check valve to prevent back flow, siphoning, overdosing and loss of prime.

The motor shaft rotates at a fixed rpm which drives the adjustable feed rate control to intermittently engage the roller assembly within the pump heads. The chemical solution in the pump tube is captured between the rollers as they rotate and compress the tube. As the rollers advance, the squeezed tube section regains its original form and generates a vacuum, creating the self- priming feature that delivers a constant flow unaffected by the outlet pressure.


  • Self-priming up to 25 feet and does not lose prime

  • Can pump off-gassing solutions

  • Solutions contained in tube, not exposed to pump components or air

  • Subassemblies fit together without tools; easy service or conversion to another model

  • Pump head universal to all Stenner pumps

  • Can run dry without damage

  • Will not clog from dirt or debris

  • Reproducible outputs within 2%

  • Adjustable feed rate control from 5%-100% in 2.5% increments

  • Pump tubes accept a variety of chemicals

170DM1 Classic Series



A rotating assembly of rollers compresses a flexible tube within a housing to create a vacuum to lift a chemical solution. The self-priming peristaltic pump is also referred to a hose, tube or dosing pump.

Double,Head,Adjustable,Output,Metering,Pump,170DM1,Classic,Series,Stenner Classic Series Pump
        - Installation
Double,Head,Adjustable,Output,Metering,Pump,170DM1,Classic,Series,Stenner Classic Series Pump
        - FAQ's
Double,Head,Adjustable,Output,Metering,Pump,170DM1,Classic,Series,Stenner Classic Series Pump
        - 45 Spec Sheet
Double,Head,Adjustable,Output,Metering,Pump,170DM1,Classic,Series,Stenner Classic Series Pump
        - 85 Spec Sheet

170DM1 Classic Series Specifications Summary

Outputs @ 60Hz
Gallons per day: 0.5 to 10.0
Gallons per hour: 0.02 to 0.42
Liters per day: 1.9 to 37.9
Liters per hour: 0.08 to 1.58
Ounces per minute: 0.04 to 0.89
Milliliter per minute: 1.32 to 26.32

Outputs @ 50Hz
Liters per day: 1.5 to 30.3
Liters per hour: 0.06 to 1.26
Milliliters per minute: 1.04 to 21.04

Discharge Pressure
0-25 psi (0-1.7 bar)

120V 60Hz; 220V 60Hz
230V 50Hz; 250V 50Hz International

shaded pole; 44 rpm; 1/30 HP

Suction Lift
25' (7.6 m)

Maximum Operating Temperature
125° F (52° C)

Amp Draw
1.7 120V; 0.9 220V, 230V, 250V

Dimensions (l x w x h)
12.7 x 5.3 x 6.0 in
(32.3 x 13.4 x 15.2 cm)

Shipping Weight
10 lbs (5 kg)

Materials of Construction
All Housings: Lexan® polycarbonate plastic
Pump tube & check valve duckbill: Santoprene® FDA approved
Suction/discharge tubing & ferrules (1/4" & 6 mm): LDPE polyethylene,
NSF/FDA approved
Tube fittings, connecting nuts, check valve fitting,
weighted strainer: Type 1 Rigid PVC-NSF listed
All fasteners: Stainless Steel
Lexan® is a registered trademark of General Electric.
Santoprene® is a registered trademark of Advanced Elastomer system

Agency listings
UL, CSA , CE, NSF-50, NSF-61

Accessories shipped with each pump
6 connecting nuts 1/4" or 3/8"
6 ferrules 1/4" & 6 mm OR 2 ferrules 3/8"
2 injection fittings
2 weighted strainer
2 20' roll of suction/discharge tubing 1/4" or 3/8" white or UV black
OR 6 mm (Europe) white
2 spare pump tube
1 mounting bracket
1 installation manual