Single Head Fixed Output Metering Pump - 85MP1 Classic Series From Stenner
Single Head Fixed Output Metering Pump
How It Works
Stenners fixed output metering pump is built with two detachable components: the motor and pump head. Outputs are dependent upon the rpm of the motor gears and the size of the peristaltic pump tube. The fixed rate pump has no output adjustment. All Stenner metering pumps have a 3-point roller design in the pump head, which acts as a check valve to prevent back flow, siphoning, overdosing and loss of prime.
The motors output shaft rotates at a fixed rpm which drives the roller assembly within the pump head. The chemical solution in the pump tube is captured between the rollers as they rotate and compress the tube. As the rollers advance, the squeezed tube section regains its original form and generates a vacuum, creating the self-priming feature that delivers a constant flow unaffected by the outlet pressure.
85MP1 Classic Series
A rotating assembly of rollers compresses a flexible tube within a housing to create a vacuum to lift a chemical solution. The self-priming peristaltic pump is also referred to a hose, tube or dosing pump.
85MP1 Classic Series Specifications Summary
Outputs @ 60Hz
Outputs @ 50Hz
Maximum Operating Temperature
Dimensions (l x w x h)
Materials of Construction
Accessories shipped with each pump