PosiFlow,Sensor,Walchem,Corporation

PosiFlow® Sensor From Walchem Corporation

PosiFlow,Sensor,Walchem,CorporationFeed verification has never been better! Walchem’s new PosiFlow® Sensor has no moving or wear parts…and does not obstruct chemical feed! The PosiFlow® sensor will verify that your metering pump is truly moving liquid and has not lost prime.

We’ve written new software into the WebMaster to make the PosiFlow® an integral part of your system. The PosiFlow® sensor is installed on the discharge side of the metering pump, and connected to the digital input option card of the WebMaster. The sensor supplies a contact closure to the WebMaster every time the metering pump pulses and the sensor detects fluid movement. The controller is programmed to know which relay the pump is connected to, and how long to wait after activating the relay before expecting a pulse from the PosiFlow® sensor. The controller will send an alarm if the pump should be operating but no flow pulses are received. The controller can also use a programmable volume-per-stroke value to totalize the volume of chemical fed.

Part Number     Material
FCP-1VC              VC
FCP-1VE              VE
FCP-1PC              PC
FCP-1PE              PE

Additional Information

Paddlewheel,Flowmeter,Walchem,Corporation
Paddlewheel,Flowmeter,Walchem,Corporation
PosiFlow,Sensor,Walchem,Corporation
Paddlewheel,Flowmeter,Walchem,Corporation
FAQs, Installation & Wiring