Boiler,Feed,Pump Systems,Albany,Pump,Company Ltd

Boiler Feed Pump Systems From Albany Pump Company Ltd

Simplex Boiler Feed Pump System

Includes one pump and motor unit sized to handle rated boiler horsepower with a 300% safety margin. A horizontal steel holding tank is mounted above the pump with necessary openings for returns, vent and drain. A float operated make-up water valve is standard. Suitable pipe connections from the tank to the pump are provided and include a suction strainer and hand operated valve. All components are mounted on a steel base. Pump operation is controlled from the boiler.

Boiler,Feed,Pump Systems,Albany,Pump,Company Ltd

 

Duplex Boiler Feed Pump System

Includes two pump and motor units, each sized to handle rated boiler horsepower with a 300% safety margin. Since each pump is sized to adequately handle rated boiler either pump pump can be removed for service or adjustment without interruption of system operation. A horizontal steel holding tank is mounted above the pumps with necessary openings for returns, vent and drain. A float operated make-up water valve is standard. Suitable pipe connections from the tank to the pump are provided and include a suction strainer and hand operated valve. All components are mounted on a steel base. Pump operation is controlled from the boiler.
Boiler,Feed,Pump Systems,Albany,Pump,Company Ltd

Sizing a Boiler Feed Pump System
- Boiler Feed Pumps are sized based on 0.2 USGPM per boiler Horsepower or 3 times the actual evaporation rate.

For Example:
A 100 Horsepower Boiler requires a 20 USGPM pump.