LC,Multi-Stage,Centrifugal,Pumps,G&L Pumps

Multi-Stage Centrifugal Pumps From G&L Pumps

45HB - 70HB

  • Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free service.
  • Impellers and Diffusers: Glass filled thermoplastic. Precision molded for high efficiencies.
  • Bowls: Constructed with 300 series stainless steel. Rabbet lock for positive alignment - no gaskets required.
  • Mechanical Seal: Carbon/ceramic faces. BUNA elastomers 300 series stainless steel metal parts.
  • Motor: Close-coupled design. Ball bearings carry all radial/axial thrust loads.
  • Designed for continuous operation. All ratings are within working limits of the motor.
  • Caution: This is a booster pump. It has no lift capability. DO NOT RUN DRY. DO NOT DEADHEAD.

Product Bulletin
Instruction Manual

GB Booster Pump Series
  • Multi-stage Design: Provides steady, quiet, vibration free, operation.
  • Optional Stainless Steel Construction: Standard cast iron for general service or stainless for filtration applications.
  • O-ring Casing Seal: Reliable high pressure sealing with easy disassembly for maintenance or repair.
  • Impellers and Diffusers: Glass filled engineered composite material with floating impeller design. High resistance to corrosion and abrasion.
  • Bowls: 300 stainless steel rabbit lock for positive alignment with no gasket required.
  • Variable Capacity: Centrifugal pump design permits selection of flow within a range for each size.
  • Mechanical Seal: A variety of face materials and elastomers to match application needs.
  • Motors: Close coupled NEMA 56J motors in open drip proof or totally enclosed design. Single phase and three phase available. Ball bearings carry all radial and axial thrust loads. Designed for continuous operation.
Product Bulletin
Instruction Manual

SSV

  • Standard NEMA motors permit a wide variety of options and fast field service.
  • NPT threads, ANSI flanges, in-line or top/bottom connections easily fit your piping requirements. The top discharge version may be swung in four directions.
  • AISI 304 or 316L stainless steel liquid end components handle more of your pumping needs.
  • Seal housing design promotes liquid flow and eliminates entrapped air or heat which could cause premature failure.
  • Impeller O-ring seal produces high pressure and efficiency per stage to keep energy costs down.
  • Impeller spacing is automatic for quick installation and reduced wear.
  • Simplified design for maximum reliability and faster repair.
  • Optional horizontal mounting and victaulic connections are available.

Product Bulletin
Instruction Manual