alpha,pH200,1/8 DIN,pH,ORP,Controller,Eutech,Instruments

alpha-COND 200 1/8 DIN Conductivity Controllers From Eutech Instruments

alpha,pH200,1/8 DIN,pH,ORP,Controller,Eutech,Instruments

Industrial Process Controllers & Monitors

alpha,pH200,1/8 DIN,pH,ORP,Controller,Eutech,Instrumentsalpha-COND 200 1/8 DIN Conductivity Controllers

  • User-Customisation through Scrolling Menu, 14-Segment LED - intuitive user interface guides user easily through setup functions

  • Multi Measurement Range- User Selectable

  • Galvanically Isolated 4-20 mA Output for remote monitoring or hardcopy recording

  • Universal Power Supply Input from 85 to 250 VAC/DC allows use at multiple sites and withstands voltage fluctuations

  • Two Level Password Protection prevents un authorized tampering with settings

  • Automatic Temperature Compensation with 3-wire Pt 100 system ensures accurate readings under fluctuating temperatures

  • Adjustable Temperature Coefficient (0.0 to 5.0%/oC) and selectable cell constants for more accurate measurements

  • Adjustable Hysteresis (Dead Band) prevents rapid contact switching near set point

  • Non-Volatile Memory retains all stored parameters and calibration data even if power fails

  • Easy Installation and Wiring with detachable plug-in connectors


CON 200: Use for plating tank, rinse water, boiler and cooling tower, feed water and blowdown control, font solution make-up and control for printing, photographic developing, chemical production process, ion exchange systems, R.O. systems, industrial process water, wastewater, dilute acids, salts and bases.


Product Specification

Conductivity Range 0.00 20.00 µS/cm
0.0 200.0 µS/cm
0.0 200.0 µS/cm
0 2000 µS/cm
0.00 10.00 mS/cm
0.00 20.00 mS/cm
0.0 to 200.0 mS/cm
0.0 200.0 mS/cm
0.1 µS/cm
0.1 µS/cm
1 µS/cm
1 µS/cm
1 mS/cm
1 mS/cm
1 mS/cm
10 mS/cm
Accuracy 1% of full scale
Temperature Range -10 to 110 C
Resolution & Relative Accuracy 0.1 C & 0.5 C
Temperature Sensor Pt 100 (3-wire)
Temperature Compensation Auto / Manual (0C to 100C)
0.0 to 5.0 %
Set Point and Controller Functions
Function Limit Control
Switching Hysteresis 10% of full scale
Contact Outputs, Controller 2 SPDT relays
Switching Voltage/ Current/ Power Max 250 VAC/ Max 3A/ Max 600 VA
Electrical Data and Connections
Power Requirement 85 to 260 VAC, 50/60 Hz or DC
Signal Output/ Load 4-20mA galvanically isolated / 200Ω
Connection Terminals 3 detachable connectors (3-pin; 7-pin & 9-pin terminal blocks)
Main Fuse 250mA, Anti-surge (BUSSMAN S504 + 250mA)
Environmental Conditions
Maximum Relative Humidity 10 to 95% (Non-condensing)
Ambient Temp. Operating Range -10 to 50 C (14 F to 122F)
Mechanical Specifications
Dimensions 96 x 48 x 150 mm
Weights 300 g (boxed)