|
|
|
|
Description |
Specification |
| The general
purpose, ultrasonic sensor provides non-contact
level detection up to 98.4" (2.5m) with
4 SPST 60 VA 1A relays and a two-wire
4-20 mA level measurement output. Each
relay can be configured on a single set
point alarm or latched on two sets for
automatic fill or empty in simplex or
duplex control modes with fail-safe logic.
The embedded controller can replace external
control hardware. The sensor is well suited
for a wide range of corrosive, sticky
or dirty type media. EchoPod is broadly
selected for day tanks, sumps, IBC totes,
lift stations and mini-bulk storage applications. |
|
|
Range:
|
4" to 8.2' (2.5m)
|
|
Signal
output:
|
4-20 mA, two-wire
|
|
Contact
type:
|
(4) SPST relays 1A
|
|
Enclosure
rating:
|
Type 6P
|
|
Process
mount:
|
1" NPT (1" G)
|
|
|
|
|
|
Description |
Specification |
| The general
purpose, ultrasonic sensor provides non-contact
level detection up to 49.2" (1.25m) with
4 SPST 60 VA 1A relays and a two-wire
4-20 mA level measurement output. Each
relay can be configured on a single set
point alarm or latched on two sets for
automatic fill or empty in simplex or
duplex control modes with fail-safe logic.
The embedded controller can replace external
control hardware. The sensor is well suited
for a wide range of corrosive, sticky
or dirty type media. EchoPod is broadly
selected for small atmospheric day tank,
skid or process vessel, lift station,
IBC, drum and sump applications. |
|
|
Range:
|
2" to 49.2" (1.25m)
|
|
Signal
output:
|
4-20 mA, two-wire
|
|
|
Contact
type:
|
(4) SPST relays 1A
|
|
Enclosure
rating:
|
Type 6P
|
|
Process
mount:
|
1" NPT (1" G)
|
|
|
|
|
|
Description |
Specification |
| The general
purpose, ultrasonic sensor provides non-contact
level detection up to 49.2" (1.25m) with 4 SPST
60 VA 1A relays. The DS14 directly replaces
contact switches connected to a PLC with 1-4
discrete points for easy design conversion or
field retrofit. Each relay can be configured
on a single set point alarm or latched on two
sets for automatic fill or empty in simplex
or duplex control modes with fail-safe logic.
The embedded controller can replace external
control hardware. The sensor is well suited
for a wide range of corrosive, sticky or dirty
type media. The DS14 is broadly selected for
small atmospheric tank, IBC, drum, skid or process
vessel, lift station and sump applications.
To configure EchoPod, download our free WebCal
software and purchase one USB interface tool. |
|
|
Range:
|
2" to 49.2" (1.25m)
|
|
Signal
output:
|
None
|
|
Contact
type:
|
(4) SPST relays 1A
|
|
Enclosure
rating:
|
Type 6P
|
|
Process
mount:
|
1" NPT (1" G)
|
|
|
|
|
|
Description |
Specification |
| The general
purpose, DX10 ultrasonic sensor provides non-contact
level measurement up to 49.2" (1.25m) with a
0-5 VDC, 0-10 VDC or 976-2000 Hz. frequency
output. Select the voltage output to directly
replace a contact measurement sensor connected
to a PLC analog input. Select the frequency
output to replace a contact measurement sensor
or switch assembly, and eliminate the cost of
an analog input card by connecting the DX10
to a PLC discrete input. The sensor is well
suited for a wide range of corrosive, sticky
or dirty type media. The DX10 is broadly selected
for small atmospheric tank, IBC, drum, skid
or process vessel and sump applications. To
configure EchoPod, download our free WebCal
software and purchase one USB interface tool. |
|
|
Range:
|
2" to 49.2" (1.25m)
|
|
Signal
output:
|
0-5 V, 0-10 V, 976-2000 Hz
|
|
Contact
type:
|
None
|
|
Enclosure
rating:
|
Type 6P
|
|
Process
mount:
|
1" NPT (1" G)
|
|
|
|
|
|
Description |
Specification |
| The general
purpose, DL10 ultrasonic sensor provides non-contact
level measurement up to 49.2" (1.25m) with a
4-20 mA output. The DL10 directly replaces contact
measurement sensors connected to a PLC analog
input card for easy design conversion or field
retrofit. The two-wire, 4-20 mA output is ideal
for longer signal distances up to 1000'. The
sensor is well suited for a wide range of corrosive,
sticky or dirty type media. The DL10 is broadly
selected for small atmospheric tank, IBC, drum,
skid or process vessel and sump applications.
To configure EchoPod, download our free WebCal
software and purchase one USB interface tool. |
|
|
Range:
|
2" to 49.2" (1.25m)
|
|
Signal
output:
|
4-20 mA, two-wire
|
|
Contact
type:
|
None
|
|
Enclosure
rating:
|
Type 6P
|
|
Process
mount:
|
1" NPT (1" G)
|
|
|
|
|
|
Description |
Specification |
| WebCal software
makes level measurement, switch and control
configuration fast and easy. Take control of
your level process with WebCal's intuitive interface,
pre-programmed menus, tank set point graphics
and custom wiring diagrams. To configure your
WebCal enabled sensor, simply download your
free copy of WebCal, create or open a saved
configuration file, and click Write to Unit.
Its that simple. |
|
|
OS
required:
|
Windows® XP & 2000
|
|
HD
space required:
|
10 MB
|
|
RAM
required:
|
256 MB
|
|
Ports
required:
|
(1) USB® 2.0
|
|
|
