Smart-Trak, Multi-Point, Level Switch, Compact Junction Box, Flowline

Switch-Pak Multi-Point Level Switch with Compact Junction Box From Flowline

Offered in CSA and Cenelec approved intrinsically safe or general purpose configurations, this high level spill prevention switch package provides a fixed level switch point with a 1A relay or dry contact closure interface for remote devices such as a PLC, SCADA or alarm. The product is typically selected for pressurized and/or highly corrosive bulk storage, day tank and waste sump applications. Specify the appropriate sensor technology, material and assembly dimension.
Corrosive single-point level detection with contact for PLC or control input
PP or PVDF construction for use in challenging corrosive environments
Offered in 3 sensing technologies for broad application coverage
PP enclosure rated NEMA 4X with 300° conduit swivel base
Available in intrinsically safe and general purpose configurations
Tech Tip Sensor Technology
For process automation with pumps, valves and alarms, package your level switch assembly with our remote relay controllers offered in a 35 mm DIN package.

Broadly applied in chemical, solvent, hydrocarbon and light weight oil media

Typically applied in wastewater media with light coating and/or foaming characteristics

Best applied in clean water or water-like chemical media that is non-coating or scaling

8" to 10' (20cm to 3m)
Switch points:
1 (set by factory)
Process temp:
F: -40° to 176°
C: -40° to 80°
150 psi (10 bar)
Wetted material:
Conduit entrance:
1/2" NPT
Enclosure rating:
NEMA 4X (IP65)
Process mount:
2" NPT (2" G)
Supply voltage:
12-36 VDC
Contact type:
(1) SPST relay
Contact rating:
GP: 60 VA
IS: 32 VDC @ 0.5A
Intrinsically safe
Supply voltage:
12-30 VDC
Contact type:
(1) SPST relay
Contact rating:
60 VA
General purpose
Contact type:
(1) SPDT reed
Contact rating:
15 VA
General purpose

Data sheet download.