Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)

PD603 Sabre P Low-Cost Process Digital Panel Meter



The Sabre P PD603 process meter combines operational simplicity with high end features to deliver the perfect low-cost 1/8 DIN digital panel meter for display only applications. The PD603’s menu structure is easy to navigate because the only selections are for input, decimal point location, and scaling values; there are no other menu choices to add confusion during the setup process. Despite being a low-cost meter, the PD603 is still packed with many features typically found only on more expensive meters, such as a NEMA 4X front, universal power supply, front panel programming, input current overload protection, UL listing, and CE marking.

Features

  • 0-20, 4-20 mA, 0-5, 1-5, 0-10, ±10 V Inputs
  • Input Current Overload Protection
  • NEMA 4X, IP65 Front
  • Shallow Depth 1/8 DIN Case 3.6" Behind Panel
  • 4 Digit Display, 0.56” (14 mm) High, Red LEDs
  • Easy Front Panel Programming
  • Scale without a Signal Source
  • Calibrate with a Signal Source
  • Maximum/Minimum Display
  • Universal Power Supply 85-265 VAC
  • 12-36 VDC/12-24 VAC Power Option
  • 24 VDC @ 200 mA Transmitter Supply Option

PD603 Sabre P Low-Cost Process Digital Panel Meter Data Sheet
PD603 Sabre P Low-Cost Process Digital Panel Meter Instruction Manual

General Specifications

  • Display: 0.56" (14.2 mm) red LED, 4 digits (-1999 to 9999)
  • Front Panel: NEMA 4X, IP65; panel gasket provided
  • Programming Methods: Four front panel buttons
  • Display Update Rate: 5/sec
  • Overrange: Display flashes 9999
  • Underrange: Display flashes -1999
  • Recalibration: All inputs are calibrated at the factory; recalibration is recommended at least every 12 months
  • Max/Min Display: Stored until reset by user or meter is turned off
  • Password: Restricts modification of programmed settings
  • Non-Volatile Memory: Settings stored for a minimum of 10 years
  • Power Options: 85-265 VAC, 50/60 Hz; 90-265 VDC, 20 W max or 12-36 VDC; 12-24 VAC, 6 W max
  • Required Fuse:UL Recognized, 5 A max, slow-blow; up to 6 meters may share one fuse
  • Normal Mode Rejection: 64 dB at 50/60 Hz
  • Isolation: 4 kV input/output-to-power line; 500 V input-to-24 VDC supply
  • Operating Temperature: 0 to 65°C
  • Storage Temperature: -40 to 85°C
  • Relative Humidity: 0 to 90%
  • Connections: Removable screw terminal blocks accept 12 to 22 AWG. Note: RJ11 header for factory use only
  • Enclosure: 1/8 DIN, high impact plastic, 94V-0, color; gray
  • Weight: 8.5 oz (241 g)
  • UL File Number: E160849; 508 Industrial Control Equipment
  • Warranty: 1 year parts & labor

Process Inputs

  • Inputs: Field selectable: 0-20 mA, 4-20 mA, 0-5, 1-5 V, ±10 V
  • Accuracy: ±0.05% FS ±1 count
  • Function: Linear
  • Decimal Point: Up to 3 decimals: d.ddd, dd.dd, ddd.d, or dddd
  • Calibration: Scale without signal or calibrate with signal source
  • Calibration Range: User programmable over entire range of meter
  • Input Impedance: Voltage range: greater than 1 MO
  • Current Range: 50-100 O, varies with resettable fuse impedance
  • Input Overload: Protected by auto-resettable fuse
  • Temperature Drift: ±50 PPM/°C
  • Transmitter Supply: Isolated, P+, P-: 24 VDC ±10% @ 200 mA max
  • HART Transparency: Analog input will not interfere with existing HART communications on the wired 4-20 mA signal
METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch