Vantageview PD6701 is one of Precision Digital's most advanced
and feature-packed plastic, field-mounted, loop-powered indicators
designed specifically for level applications that require a
feet & inches display. The PD6701 can indicate up to 399
feet, 11 and 15/16 (or 7/8) inches. The PD6701 is built in a
NEMA 4X and IP65 rated plastic enclosure which can stand up
to even the harshest environmental conditions. It features a
dual-line display that can be easily scaled in the field for
any 4-20 mA analog input. Two features that really make the
PD6701 stand out are its wide viewing angle display and SafeTouch®
through-window buttons. These buttons allow the PD6701 tank-side
indicator to be programmed and operated through the cover window,
thus eliminating the need to remove the cover in dirty or wet
Display Level in Feet & Inches
4-20 mA Input Loop-Powered
Programmable 1/8 or 1/16 Inch Display
20-Segment Tank Level Indicator
Lower Display for Tag, Volume, or Percent
SafeTouch Through-Window Button Programming
Open Collector Alarm Output
Loop-Powered or External DC-Powered Backlight Standard
Display: Feet & Inches display: 0.60" (15.2 mm) high, 0 to 399 FT - 11 15/16 IN with 1/16 or 1/8 fraction display.
Lower 7-digit display: 0.4" (10.2 mm) high, 14-segment alphanumeric characters, display tag, volume 0 to 9999999, and/or 0-100 percent.
Tank Level Indicator: 20 segments, F (Full) and E (Empty)
Alarm Indication: HI and LO; Backlight: White, loop or DC powered
Display Assignment: Lower display may be assigned to custom unit or tag, volume, volume and tag, percent height, percent height and tag, or off.
Display Update Rate: Ambient > -25°C: 2 Updates/Second Ambient < -25°C: 1 Update/5 Seconds
Overrange and Underrange: Level display flashes to 399 FT 11 15/16 IN Volume display flashes 9999999 if overrange, -999999 if underrange.
Programming Method: Four SafeTouch through-window buttons when cover is installed. Four internal pushbuttons when cover is removed.
Noise Filter: Programmable low (LO), medium (MED), high (HI), or off (OFF)
Recalibration: Recalibration is recommended at least every 12 months.
Password: Programmable password restricts modification of settings.
Nonvolatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.
Normal Mode Rejection: 64 dB at 50/60 Hz
Environmental: Operating temperature range: -40 to 75°C
Storage temperature range: -40 to 75°C
Relative humidity: 0 to 90% non-condensing
Connections: Screw terminals accept 12 to 22 AWG wire
Enclosure: NEMA 4X, IP65 plastic field enclosure. Color: grey. Material: Polycarbonate with UV Stabilizer. Three ¾" NPT threaded conduit openings. Two ¾" NPT plastic conduit plugs, with 1.29" wrenching flats and a screwdriver slot, are included.
Mounting: May be mounted directly to conduit. Two slotted flanges for wall mounting or NPS 1½" to 2½" or DN 40 to 65 mm pipe mounting.
Overall Dimensions: 5.67" x 5.25" x 4.18" (W x H x D) (144 mm x 133 mm x 106 mm)
Weight: 1.65 lbs (26.4 oz, 0.75 kg)
Warranty: 3 years parts and labor
Accuracy: ±0.03% of calibrated span ±1 count
Input Range: 3 to 24 mA
Multi-Point Linearization: 2 to 32 points each for level and volume
Temperature Drift: 50 PPM/°C from -40 to 75 °C ambient
Maximum Voltage Drop: Without Backlight or with Externally-Powered
(DC Powered) Backlight: 3.0 VDC @ 20 mA
With Loop-Powered Backlight: 6.0 VDC @ 20 mA
Equivalent Resistance: 150 O @ 20 mA without loop-powered backlight. 300 O @ 20 mA with loop-powered backlight.
Input Overload: Over current protection to 2 A max.
HART Transparency: Analog input will not interfere with existing HART communications on the wired 4-20 mA signal
Open Collector Output
Alarm Output: Assign to level or volume for high or low alarm trip point.
Deadband: 0-100% FS, user selectable
Acknowledge: Front panel ENTER button and external RESET terminals resets output and screen indication.
METEX CORPORATION LIMITED
Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.
Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.
Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.