Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)

Conductivity Sensors


Conductivity Sensors

Conductivity General Purpose

Turtle Tough GP-I Conductivity Sensor (CPVC Body)

The Turtle Tough Slurry conductivity sensors are designed for use in general purpose applications up to 200,000 micro Siemens and provide outstanding chemical resistance for a wide variety of process media. Open front end geometry resists clogging and reduces maintenance requirements to a minimum.

<< Learn More >>

Turtle Tough GP-I Conductivity Sensor (Teflon/Kynar)

The Turtle Tough Slurry conductivity sensors are designed for use in general purpose applications up to 200,000 micro Siemens and provide outstanding chemical resistance for a wide variety of process media. Open front end geometry resists clogging and reduces maintenance requirements to a minimum.

<< Learn More >>

Turtle Tough GP-II Immersion Conductivity Sensor (PP Fitting)

Wetted materials of construction are 316 stainless steel and Teflon, with double O-ring seals at all points. The outer EPDM O-ring bears the brunt of process interface, allowing the back O-ring to maintain reliable sealing free from chemical attack. An integral temperature element interfaces directly with the TT-MA series analyser and allows automatic compensation for maximum accuracy. Standard cable length is 3 meters.

<< Learn More >>

Turtle Tough GP-II Immersion Conductivity Sensor (SS Fitting)

The Turtle Tough GP Sensor series offers a compact design that allows installation into standard pipe fittings in small line sizes such as 3/4? and 1?, avoiding the need for special flow cells. Simplicity of the design also allows them to be economically offered in exotic metals for especially corrosive chemical applications.

<< Learn More >>

Conductivity Specialty

High Temperature & Pressure Immersion Conductivity Sensor

The Turtle Tough HTP Conductivity sensor was designed for high pressure, high temperature conductivity measurements and is an ideal choice for boiler control applications. Blowdown control, condensate monitoring, leak detection on heat exchangers, and steam purity measurements are just a few of the many applications in which this rugged and reliable sensor can be used. A double seal design extends the sensor life more than twice that of single or epoxy sealed units. These sensors can withstand temperatures up to 205°C and pressures up to 500 psig. Wetted materials of construction are 316 stainless steel, PEEK, and EPDM O-Rings.

<< Learn More >>

Sanitary Immersion Conductivity Sensor

The Turtle Tough Conductivity sensors are welded to custom size blind flanges and can then be inserted into standard Tee fittings in sanitary systems using fittings by Ladish or Alfa-Laval Tri-Clover. They are ideal for chemical CIP inline installation to directly replace existing toroidal installation schemes. Only FDA compliant food grade materials are used. Flange sizes include 1/2?, 1?, 1.5?, 2? and 2.5?. Rated for use up to 150 psig at 130 degree Celsius. Cell Constants from 0.01 to 10.0.

<< Learn More >>

HOT TAP Valve Retractable Conductivity Sensor

The Turtle Tough VRS Valve Retractable Conductivity sensors have been designed for a wide measurement range in difficult process conditions. They can be installed in submersion, insertion, or hot-tap configurations, and are good for most applications from high purity water to high chemical concentrations.

<< Learn More >>

High Conductivity Measurement Conductivity Sensor

The Turtle Tough Conductivity Sensors for high conductivity are made very compact in size for a variety of applications. It’s small footprint and economical pricing make it ideal for use in OEM applications, such as skid mounted R.O. systems, water treatment units, chemical dilutions and many more. The insulator comes standard as CVPC but can also be supplied with TEFLON (PTFE) upon request. Alternative material of construction are also available for the measuring electrodes (316SS standard).

<< Learn More >>

Low Fouling Conductivity Sensor

The Turtle Tough Low Fouling Conductivity Sensor is ideal for food and beverage facilities that require 1000 psig high pressure steam washdowns for sterilization of their tanks between batches. This sensor can support high temperature conditions inline installations where the process media can get up to 205°C.

<< Learn More >>

METEX CORPORATION LIMITED

About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.

Sitemap

Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch