Smart pH Sensors
Hardware and Accessories
ISE Sensor for Fluoride
USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - firstname.lastname@example.org
TT-GP-F-6008 ISE Sensor for Fluoride
Thefluoride-ise-270x334 Turtle Tough Fluoride ion selective electrode is a solid-state fluoride mono-crystal and conductive-polymer reference system that allows for extremely low cost-of-ownership without any costly reagents or sample conditioning.
It is the ONLY Fluoride (F-) ion selective sensor that can be used in strong acid fluoride etching service at elevated temperatures up to 70 degrees Celsius and can undergo strong acid cleaning to remove calcium and silicate deposits. It is also suitable for acid fluoride metal etching process measurement, or fluoride wastewater treatment systems.
Turtle Tough provide an unrivalled and proven solution for Fluoride measurement. The ISE sensor is capable of measuring from 0.019 to 19,000 ppm (1X10-6 to 1.0 Molar) and its lowest limit of detection is 0.001 ppm (5X10-8 Molar). It will operate over a broad pH range from 2.5 to 11.
For applications where the pH is above 8.0, a pH sensor is added to the analyser to provide compensation of both pH and temperature. The sum of the measured unbound ammonium ions and dissolved ammonia gas formed must be computed as a function of both real-time continuous pH & temperature parameters.
Our valve refluoride_ion_selective_ise_sensortractable sensor is uniquely designed to interface with both our hot-tap insertion valve retractable assembly or our sanitary fitting.
Our hot-tap assemblies are a common feature in industries where direct access to the process is required inline or in-tank without interruption to service.
Digital Smart Sensor Technology (DSS)
This sensor is available with our digital smart sensor technology. This plug and play sensor has a quick connect fitting, eliminating the need for hard wiring to the analyser. On-board sensor memory allows the storage of calibration data, analyser configurations and sensor service history. This allows the sensor to be conveniently maintained and calibrated off-site or in the laboratory and pre-programmed with calibration data and analyser configurations. This stored information automatically uploads to the analyser upon connection and eliminates the need for any interaction with the analyser, greatly simplifying the change-out of sensors. A service log stored on the sensors is ideal for maintenance and quality assurance records.
The TT-GP-NH4-6013 interfaces with the TT-MA or TT-MAD ISE Modular Analysers. The unique modular design enables you to create a fully functional, multi-parameter analyser with any combination of different TT-MA analytical modules.
The TT-MA and MAD Analyser modules have the following features: