Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument

Potentiometer Position Input Two Wire Transmitter Model SR2800


ORDERING INFORMATION
 
SR2800, (   )    
    |      
    |     Potentiometer % of travel

Example: SR2800,0/100%

Note: The potentiometer value is not required in the ordering information.

 

Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument

Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument Catalogue
Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument Manual


Features

Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument Provides DC Output Proportional to a Potentiometer Position Input
Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument Potentiometer Values from 1 kilohm to 50 kilohms
Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument Reverse Polarity-Protected
Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument Test Points for Loop Current Monitoring Without Breaking Loop Circuit
Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument 50 mm Diameter Case - 33 mm Mounting Hole Spacing
Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument NEMA-4 and Explosion-Proof Connection Heads Available
Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument Low Cost
Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument Intrinsically Safe Design with FM and CSA Approvals Pending
Potentiometer,Position,Input,Two,Wire,Transmitter,Model SR2800,Wilkerson Instrument 5 + 5 Year Warranty


Description

The SR2800 is a low-cost, reliable, potentiometer input two-wire transmitter for field or panel mounting in various industrial housings and enclosures.  It provides a DC output current (4/20 mA) proportional to the wiper position of a potentiometer.

The module utilizes a stable 2.5 VDC power supply to excite the potentiometer.  Any value potentiometer from 1 kilohm to 50 kilohms may be used.  The output ZERO and SPAN controls are accessible through the top of the case.  Zero is adjustable 20% and span 15%.  Terminations are made to screw terminal connectors on the top of the case.

Test points located on the SR2800 front panel allow verification of loop current value, with a milliameter, without breaking the loop current.

Typical Application

Remote tank level, valve or actuator position data acquisition.

Mounting

The SR2800 can be mounted in a connection head (TSH-A6L), explosion-proof housing (XJAY), or on a flat surface using the two 4.5 mm diameter mounting holes provided. Standard 33 mm hole center spacing allows for mounting in most connection heads. The 5.08 mm center hole allows clearance for input wiring. An optional DIN-Rail mounting kit is available (DMP2000).

Specifications

INPUT POTENTIOMETER RESISTANCE
Any value from 1 kilohm to 50 kilohms

COMMON MODE REJECTION
120 dB, DC to 60 Hz

INPUT SPAN ADJUSTMENT 
75% to 100% of pot rotation

INPUT OFFSET ADJUSTMENT
0 to 25% of pot rotation

OPERATING TEMPERATURE
-13F to 176F
-25C to  80C

INPUT IMPEDANCE
> 10 megohms

SUPPLY VOLTAGE EFFECT
0.02% of span max, 10 to 36 V

OUTPUT RANGE
4/20 mA
 Current limited = 35 mA

MAX LOAD RESISTANCE
= [(V supply - 10)/20 mA] kilohms

RESPONSE TIME
- Step Change
 100 ms for 99% of final value

TEMPERATURE STABILITY
0.015 % of span perC

POWER
10-36 VDC, polarity protected

ACCURACY
0.1% of span