Mighty Module,MM1005,4-20mA,Input,Limit,Alarm,24VDC Power Supply,2-Wire TX

Mighty Module MM1005 4-20mA Input Limit Alarm With 24VDC Power Supply For 2-Wire TX


MM1005 4-20mA Input Limit Alarm With 24VDC Power Supply For 2-Wire TX

Mighty Module,MM1005,4-20mA,Input,Limit,Alarm,24VDC Power Supply,2-Wire TXDescription

The MM1005 monitors a DC current input and trips a dpdt, 5 A relay when the input exceeds the desired level. Normal operation has the relay energized for the non-alarm condition and de-energized for an alarm condition. This provides a fail-safe alarm condition for loss of power to the module. Option R reverses this logic. The alarm has a set of red/green LEDs to indicate alarm status.

The module contains a 24 VDC transmitter power supply specifically designed for use with two-wire and other 24 VDC powered transmitters.

The deadband adjustment allows a deadband of 0.5% to 100% of span to be set into the module. The deadband is symmetrical about the setpoint.

The module includes filtering and conditioning to reduce susceptibility to transients and noisy operations.

Mighty Module,MM1005,4-20mA,Input,Limit,Alarm,24VDC Power Supply,2-Wire TX Download MM1005 Manual

Features

Mighty Module,MM1005,4-20mA,Input,Limit,Alarm,24VDC Power Supply,2-Wire TX
Provides a DPDT Relay Contact Closure at a Preset DC Current Input
Mighty Module,MM1005,4-20mA,Input,Limit,Alarm,24VDC Power Supply,2-Wire TX
Standard Fail-safe Operation
Mighty Module,MM1005,4-20mA,Input,Limit,Alarm,24VDC Power Supply,2-Wire TX
Red and Green LED Alarm Status Indicators
Mighty Module,MM1005,4-20mA,Input,Limit,Alarm,24VDC Power Supply,2-Wire TX
Adjustable Deadband
Mighty Module,MM1005,4-20mA,Input,Limit,Alarm,24VDC Power Supply,2-Wire TX
24 VDC Power Supply for Two-Wire Transmitter
Mighty Module,MM1005,4-20mA,Input,Limit,Alarm,24VDC Power Supply,2-Wire TX
4/20 mA Input Range
Mighty Module,MM1005,4-20mA,Input,Limit,Alarm,24VDC Power Supply,2-Wire TX
10 + 5 Year Warranty

Typical Applications

HI/LO pressure alarm, level/position control.

Mounting

The module is designed to plug into a standard 11-pin relay socket. Part number MP011 is a molded plastic socket suitable for mounting on a flat surface or in a 2 3/4 inch wide PVC snap track (TRK48). Use CLP-1 hold-down clip if needed. A Killark HK Series explosion-proof housing with dome and 11-pin socket is available (HKB-HK2D-11).  A DIN rail socket (part number DMP011) is available.

Specifications

INPUT RANGE
4/20 mA

INPUT IMPEDANCE
61.9 ohms

TRANSMITTER POWER SUPPLY
24 VDC regulated
30 mA max

SETPOINT
0 to 100% of span

DEADBAND
0.5% to 100% of span

RESPONSE TIME
20 ms typical
  (range dependent)

ACCURACY
0.01% of span

COMMON MODE REJECTION
120 dB, DC to 60 Hz

RELAY CONTACTS
1 (dpdt)
Resistive Load:
  5 A max, 150 W max
  220 VAC max, 30 VDC max

Inductive Load
  (Power factor > = 0.4):
  2.5 A max, 75 W max
  220 VAC max, 30 VDC max

TRANSISTOR OUTPUT (Option V)
Relay driver
  (12 V coil, > = 220 ohms)
or open-collector outputs
  sink 100 mA, 30 V supply max

LINEARITY (Option T)
0.01% of span

OPERATING TEMPERATURE
 14F to 140F
-10C to  60C

TEMPERATURE STABILITY
(0.02% of span + 30 V)/C max

POWER
115 VAC 10%, 50/60 Hz
  (2.5 W max)
230 VAC 10%, 50/60 Hz
  (2.5 W max)


CONNECTIONS
Power, AC L1
Power, AC L2
Input +
Input -
Relay Set 1 NO
Relay Set 1 C
Relay Set 1 NC
Relay Set 2 NO
Relay Set 2 C
Relay Set 2 NC
PINS
1
3
4
5
6
7
8
9
10
11