Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)

MS2500L Loop-Powered LPR Transmitter

USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 -

Corrosion Monitoring,Instruments,Meters

MS2500L Loop-Powered LPR Transmitter

The MS2500L is a corrosion transmitter capable of measuring and transmitting data from all types of 3-electrode linear polarization resistance (LPR) corrosion probes.

Corrosion rate measurements are made using the linear polarization resistance technique. The instrument measures the current required to polarize the electrodes of a probe to a known potential. From the polarization potential and the measured current, polarization resistance can be calculated. Then, using Faraday’s law, instantaneous corrosion rate is calculated from polarization resistance.

Another feature of the MS2500L is its high-precision voltmeter. This is used to measure the open-circuit potential between electrodes.

Measurements are transmitted via 4-20mA current loop. Since current loop signals are not as sensitive to line loss as other types of data signals, the MS2500L may be located up to ten miles away from the data receiver under proper conditions.

The MS2500L is completely loop-powered, so installation is simple. A two-wire connection is all that is required for both instrument power and data transmission. Setup is also simple, using a set of switches to select the measurement function (corrosion rate or electrode potential).

The MS2500L is housed in a NEMA rated explosion-proof and weather-proof enclosure, and the probe cable is connected through a water-tight, explosion-proof cable gland. This makes the MS2500L suitable for use in almost any indoor or outdoor environment

Technical Specifications

Model: MS2500L - Loop-Powered LPR Transmitter (Ordering # IN2500L)

Physical Data

Instrument Weight: 5.02 lb. (2.28 Kg)
Total Weight w/ Accessories: 7.08 lb. (3.21 Kg)
Instrument Dimensions: 5.81" H x 4.5" W x 4.81" D (14.76cm x 11.43cm x 12.22cm)
Case Specifications: Explosion Proof (FM, CSA, CENELEC, UL)
Class I, Groups B, C, D, Class II, Groups E, F, G, Class III,
Mounting Specifications: 0.728" H x 1.756" W (1.85cm x 4.46cm) Bolt Pattern with 1/4-20 Tapped Mounting Holes, or may be mounted on a 1/2" to 2" (1.27cm to 5.08cm) pipe using supplied hardware
Operating Temperature: 32? to 158?F (0? to 70?C)
Storage Temperature: 32? to 158?F (0? to 70?C)

Performance Data

Measurement Type: 3-electrode LPR, Potential
Range: 3-electrode: 0-100 mpy Potential: ? 1V
Cycle Time: 0.1 to 99.9 minutes

Electrical Data

Power Requirements: 11 to 35 VDC
Maximum Probe Cable Distance: 10 ft. (3.05 m)
Output Specifications: 4-20 mA Current Loop Output

Special Features

•Switch selectable measurement type and cycle time
•Loop powered

Accessory Items

10' Probe Cable (attached), Meter Prover, Mounting Hardware, Operation Manual


About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.


Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch