LM-200-Q8N - LM-200-Q6N - LM51 Meters
USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - email@example.com
The LM-200-Q8N mechanical oil meter with strainer is factory calibrated for use with Hydraulic fluid and up to 30 weight oil. This oil meter can be field calibrated for other fluids like oil and solvent.
The LM-200-Q6N mechanical oil meter with strainer is factory calibrated for use with hydraulic fluid. This oil meter can be field calibrated for other fluids like oil and solvent. This is a great mechanical oil meter for measuring waste oil. Inlet/Outlet = 3/4 inch NPT
This is the electronic disc meter can be used with motor oil, gear oil, hydraulic oil, antifreeze (not to exceed 50% water), ATF and waste oil. Do not use with flammable fluids or antifreeze that exceeds 50% water.
The FLOMEC® LM51DN economy positive displacement meter has a modular design, and is low cost, lightweight and rugged, making it the best choice for overhead reel systems. Perfect for metering engine oils or transmission fluids with a maximum viscosity of 1,000cp.
The electronic register module contains a microprocessor board powered by a lithium battery. It can be programmed to measure in pints, quarts, liters, or US gallons. The meter calibration factor is determined during factory test. The meter can be recalibrated in the field for fluids or different viscosity if required. A 6-digit liquid crystal display, accurate to the second decimal place, shows the exact amount of fluid dispensed. The entire register module is protected from the wear and tear of normal shop use by a rugged, glass filled, shock resistant, nylon housing.