Search This Site

(Search by Product Type i.e. Level or Brand Name i.e. Walchem)

DC4000 Cooling Tower-Boiler Controller

USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 -

Electronic Metering Pump, LMIDC4000 Cooling Tower-Boiler Controller

The DC4000 may be programmed as a bleed and feed cooling tower controller or boiler controller. Standard features include; four feed modes (Feed & Bleed, % of Time, % of Bleed, Flow meter Pulse), intermittent or continuous sampling, uS or PPM display, flow totalizer, and manual test modes. The boiler mode includes a time-trap sampling method that prevents the flashing problems that are so common in boilers. Programming is simple and is accomplished with only three keys. The backlit liquid crystal display and LEDs provide a visual indication of operating conditions and equipment status.

Features & Benefits

  • Continuous or timed boiler sampling

  • Multiple inhibitor feed modes

  • 0 - 20,000 ìS range

  • Solenoid or motorized valve control

  • Open- / closed-loop system programming

  • 4 - 20 mA output [programmable]

  • Built-in equipment test circuits

  • Backlit LCD display


BLEED or BLOWDOWN of system water by valve control can be based on several set point options:

  • Conductivity set point
  • Hysteresis delay (lower than set point) to avoid valve operation chattering
  • Rising or Falling conductivity trip points

FEED of chemical (inhibitor) can be based on four (4) different methods:

  • FEED at the same time system BLEEDS (lockout timer limits maximum FEED time)
  • FEED time calculated as a percentage of total BLEED time
  • FEED based on a timed cycle (pump is on for a percentage of this timed cycle)
  • FEED based on flow meter input

ALARM indicators and relay outputs are energized based on the following conditions:

  • HIGH conductivity set point is reached
  • LOW conductivity set point is reached
  • NO FLOW condition exists (flow switch must be installed)
  • Probes
  • Flow Switch Assemblies
  • Actuators
  • Extension Cable Assemblies
  • Replacement Parts


About Us

Metex Corporation Limited has been providing superior products and services to the process control, chemical treatment, waste water, industrial and manufacturing industries for over 25 years. It is our goal to continually provide our customers with the best possible equipment, technology, and service.


Our Products

Dataloggers, sensors, pumps, recorders, hand held instruments, flow instrumentation, level controls, valves, instrumentation, containers, tanks, transmitters, data loggers, digital indicators, mixers and agitators, pressure intrumentation, analyzers and controllers for a variety of industrial applications such as water quality, pH/ORP and more.

Website Content

Water Analyzers and Controllers, Wireless Products, Corrosion Monitoring Equipment, Cooling Tower and Boiler Controllers, a wide variety of Pumps, Valves, Dataloggers and Recorders, HVAC, Instrumentation, Skids and Systems, Containers and Tanks from world leading manufacturers are products you will find on this site.

Get in Touch