Pyxis CR-200 Wireless LPR Corrosion Rate Sensor
USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - firstname.lastname@example.org
CR-200 Wireless LPR Corrosion Rate Sensor
The CR-200 is a battery powered and Bluetooth enabled corrosion sensor for true wireless connectivity. The CR-200 makes it possible to monitor corrosion at multiple test points, avoiding the complications of running power and signal output wires from the sensor to a controller and/or display unit. The CR-200 sensor can store up to 6-months worth of data that can be wirelessly using the uPyxis® APP for Mobile or Desktop devices.
The Pyxis CR-200/300 corrosion rate sensors are ideal for cooling and process water treatment monitoring where robustness and affordability are a must. The sensors utilize the linear polarization resistance (LPR) method to produce a raw signal. The raw signal is conditioned, amplified, and digitized directly in the sensor itself. This avoids the interferences and attenuation of the raw signal caused by long-distance wiring needed for other corrosion probes to a separate signal conditioner or transmitter box. The Pyxis corrosion sensors measure sample water conductivity directly and compensate for the conductivity impact on the LPR measurement. These unique product characteristics make the Pyxis LPR superior in performance and accuracy. In addition to the LPR measurement to obtain the general corrosion rate, the CR-200/300 sensors also measure electrochemical noise. The measured noise data is used to calculate an index to quantify the localized corrosion rate also referred to as pitting.
CR200 = Connected to uPyxis App or BTA100 Single Display
LPR CORROSION SENSORS From Pyxis
CR200 LPR Corrosion Sensors
CR200 = Lithium Battery & BlueTooth Output
0.001 10 mpy
Easy Data download via our uPyxis App