Smart pH Sensors
Hardware and Accessories
ISE Sensor for Ammonium
USA Toll Free: 1-800-730-0302 Tel: 416-240-1920 - email@example.com
TT-GP-NH4-6013 ISE Sensor for Ammonium
The Turtle Tough Ammonium ion selective electrode is designed for valve retractable and sanitary use with double o-ring seals and 3/4" MNPT back end thread. It is the ONLY Ammonium (NH4+) ion selective sensor that can be used in heavy industrial process and wastewater treatment systems, providing measurements up to saturated levels and can operateammonium-ise continuously at temperatures up to 50°C.
Turtle Tough provide an unrivalled and proven solution for Ammonium measurement. The ISE sensor is capable of measuring from 0.090 to 18,000 ppm (5X10-6 to 1.0 Molar) and its lowest limit of detection is 0.004 ppm (5X10-7 Molar). It will operate over a broad pH range from 2.5 to 11.
For applications where the pH is above 8.0, a pH sensor is added to the analyser to provide compensation of both pH and temperature. The sum of the measured unbound ammonium ions and dissolved ammonia gas formed must be computed as a function of both real-time continuous pH & temperature parameters.
Our valve retractable sensor is uniquely designed to interface with both our hot-tap insertion valve retractable assembly or our sanitary fitting.
Orur hot-tap assemblies are a common feature in industries where direct access to the process is required inline or in-tank without interruption to service.
Before proceeding further, it is recommended that a review of the following technical documents that describes the general provisions for online ion selective measurements:
Digital Smart Sensor Technology (DSS)
This sensor is available with our digital smart sensor technology. This plug and play sensor has a quick connect fitting, eliminating the need for hard wiring to the analyser. On-board sensor memory allows the storage of calibration data, analyser configurations and sensor service history. This allows the sensor to be conveniently maintained and calibrated off-site or in the laboratory and pre-programmed with calibration data and analyser configurations. This stored information automatically uploads to the analyser upon connection and eliminates the need for any interaction with the analyser, greatly simplifying the change-out of sensors. A service log stored on the sensors is ideal for maintenance and quality assurance records.
The TT-GP-NH4-6013 interfaces with the TT-MA or TT-MAD ISE Modular Analysers. The unique modular design enables you to create a fully functional, multi-parameter analyser with any combination of different TT-MA analytical modules.
The TT-MA and MAD Analyser modules have the following features: